Share
Print
APPROVED SUPPLIER
DOT Approved Brass Air Brake Push-To-Connect Male Elbow, 90 deg., 1/2 in. Tube OD x 1/4 in. Pipe Thread
Technical Specifications
Angle
90 deg.
Meets Standards
D.O.T. FMVSS 571.106 and SAE J1131
Brand
APPROVED SUPPLIER
Package Quantity
5
Brass DOT Push-to-Connect Fittings Type
Elbows
Pipe Thread
1/4 in.
Connection Type
Male
Shape
Elbow
DOT Approved
Yes
Shipping Weight
0.75 lb.
Fitting Style
Swivel
System of Measurement
Fractional
Fitting Type
Push-To-Connect
Tube Outside Diameter
1/2 in.
Gasket Material
Ethylene Propylene
Vibration Resistance
Moderate
Material
Brass
Working Pressure
250 psi
Product Description
Push To Connect Male Elbow Swivel
- Quick Disconnect; Simply Push Tubing In, No Tools Or Loose Parts To Handle In Tight Places.
- Full Flow Design, Provides Up To 60% More Flow Area Than Conventional Fittings With Internal Tube Supports.
- Brass Construction. Elbows And Tees Are Forged Brass.
- Swivel Elbow And Tees For Ease Of Orientation.
- Pre-Applied PTFE Based Pipe Sealant On All Male Pipe Threads.
- Dot Approved.
- Typical Applications: Windows, Door Locks, Mirrors, Wipers, Air Operated Seats, Operating Gauges, Air Horns, Heater Controls, Gear Shifts, Fifth Wheels, And Air Brake Connections.
- Working Pressure: 250 Psi
- Temperature Range: -20° F. To 200° F.
- Applicable Standards: Fmvss-106
- Tube Outside Diameter: 1/2
- Male Thread: 1/4
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
A/B Push Ml Elb 1/2X1/4 Swivel
Name | Item | Description | |
---|---|---|---|
UNSPSC CODES | 27131600 | Air fittings and connectors | |
VMRS (ATA) CODES | 053-008-004 | A/B ML ELBOW 1/2 X 1/4 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here