Share
Print
APPROVED SUPPLIER
Brass, Male Run Tee Swivel Connector, Air Brake Push-to-Connect, 1/4 in. x 1/4 in. x 1/4 in.
Technical Specifications
Body Wrench Size
7/16 in.
Grade
CA360
Brand
APPROVED SUPPLIER
Hex Size
9/16
Brass DOT Push-to-Connect Fittings Type
Tees
Material
Brass
Connection Type
Male
Meets Standards
D.O.T. FMVSS 571.106 and SAE J1131
DOT Approved
Yes
Mfr. Part Number
91251
Fitting Connection (A) Style
Push to Connect
Package Quantity
3
Fitting Connection (A) Tube Size
1/4
Pipe Thread
1/4 in.
Fitting Connection (B) Gender
Male
Plating
None
Fitting Connection (B) Pipe Size
1/4 in.
Pressure Connection Cross
D1171S-04-04-04
Fitting Connection (B) Style
NPTF Pipe
Shape
Run Tee
Fitting Connection (B) Thread Size
1/4-18
Shipping Weight
.36 lb.
Fitting Connection (C) Style
Push to Connect
System of Measurement
Fractional
Fitting Connection (C) Tube Size
1/4 in.
Tube Outside Diameter
1/4 in.
Fitting Material
Brass
Vibration Resistance
Good
Fitting Style
Male Run Tee Swivel
Weatherhead Cross
1871X4X4S
Fitting Type
Push-To-Connect
Working Pressure
150
Gasket Material
Ethylene Propylene
Product Description
- Typical Applications:
- Air brakes, instrumentation, air controls, air bags, and air seats.
- Exceeds DOT pressure requirements for air brake systems.
- For use with SAE J844 type A or B air brake tubing.
- Pre-Applied PTFE Based Pipe Sealant On All Male Pipe Threads.
- Quick Disconnect - Simply push tubing In, no tools or loose parts to handle in tight places.
- Pipe threads are the most common fitting style used in the United States and Canada.
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
A/B Push Ml Run Tee 1/4X1/4 Sw
Name | Item | Description | |
---|---|---|---|
WEATHERHEAD | 1871X4X4 | A/B ML RUN TEE 1/4x1/4 | |
WEATHERHEAD | 1871X4X4S | A/B ML RUN TEE 1/4x1/4 | |
UNSPSC CODES | 27131600 | Air fittings and connectors | |
VMRS (ATA) CODES | 053-008-004 | A/B TEE 1/4 X 1/4 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here