Share
Print
Best Seller
APPROVED SUPPLIERBrass, Male 90° Swivel Connector, Air Brake Push-to-Connect, 1/2 in. x 3/8 in.
Technical Specifications
Key Specifications
Brand
APPROVED SUPPLIER
Connection Type
Male
DOT Approved
Yes
Fitting Connection (A) Style
Push-to-Connect
Fitting Connection (A) Tube Size
1/2 in.
Fitting Connection (B) Gender
Male
Fitting Connection (B) Pipe Size
3/8 in.
Fitting Connection (B) Style
NPTF Pipe
Fitting Connection (B) Thread Size
3/8"-18
Fitting Style
Male connector
Fitting Type
Push-to-Connect
Grade
CA360
Hex Size
5/8 in.
Material
Brass
Meets Standards
D.O.T. FMVSS 571.106 and SAE J1131
Mfr. Part Number
91235
Package Quantity
3
Pipe Thread
3/8 in.
Plating
None
Push-to-Connect Fittings Type (Brass DOT)
Elbows
Shape
Elbow
Shipping Weight
.56 lb.
System of Measurement
Fractional
Tube Outside Diameter
1/2 in.
Vibration Resistance
Good
Working Pressure
150 psi
Brand
APPROVED SUPPLIER
Material
Brass
Connection Type
Male
Meets Standards
D.O.T. FMVSS 571.106 and SAE J1131
DOT Approved
Yes
Mfr. Part Number
91235
Fitting Connection (A) Style
Push-to-Connect
Package Quantity
3
Fitting Connection (A) Tube Size
1/2 in.
Pipe Thread
3/8 in.
Fitting Connection (B) Gender
Male
Plating
None
Fitting Connection (B) Pipe Size
3/8 in.
Push-to-Connect Fittings Type (Brass DOT)
Elbows
Fitting Connection (B) Style
NPTF Pipe
Shape
Elbow
Fitting Connection (B) Thread Size
3/8"-18
Shipping Weight
.56 lb.
Fitting Style
Male connector
System of Measurement
Fractional
Fitting Type
Push-to-Connect
Tube Outside Diameter
1/2 in.
Grade
CA360
Vibration Resistance
Good
Hex Size
5/8 in.
Working Pressure
150 psi
General
Gasket Material
Ethylene Propylene
Weatherhead Cross
1869x8S
Gasket Material
Ethylene Propylene
Weatherhead Cross
1869x8S
Product Description
- Typical Applications:
- Air brakes, instrumentation, air controls, air bags, and air seats.
- Exceeds DOT pressure requirements for air brake systems.
- For use with SAE J844 type A or B air brake tubing.
- Quick Disconnect - Simply push tubing In, no tools or loose parts to handle in tight places.
- It is recommended to applied thread sealant to all pipe threads.
- Pipe threads are the most common fitting style used in the United States and Canada.
Frequently Bought Together
Currently Viewing
A/B Push 90° Ml Elb 1/2X3/8 Sw
| #91235 | Pkg Qty: 3
| #200-1 | Pkg Qty: 1
Available Assortments View All
| Assembly | Disassembly |
 |  |
| Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
A/B Push 90° Ml Elb 1/2X3/8 Sw
For more product information by email, click here