Share
Print
APPROVED SUPPLIER
Sleeve: Brass, For 1/4 in. Tube OD, Compression, CA 360
Technical Specifications
Key Specifications
Brand
APPROVED SUPPLIER
Pack Quantity
25
DOT Approved
Yes
Shipping Weight
0.05 lb.
DOT Compression Fittings Type
Sleeves (Ferrule)
System of Measurement
Fractional
Fitting Type
Compression Air Brake Fitting
Temperature Range (Deg. F)
-40 to +200 deg. F
Grade
CA360
Tube Outside Diameter
1/4 in.
Material
Brass
Vibration Resistance
Fair
Meets Standards
SAE and DOT FMVSS 571.106
Working Pressure
Up to 150 psi
Mfr. Part Number
906502
General
For Use With
SAE J844 Type A or B Nylon Tubing
Product Description
Sleeve Air Brake Fitting For Nylon Tubing
- Primary Applications: Air Brake Systems, Air Controls, And Gauge Lines.
- Exceeds DOT Pressure Requirements For Air Brake Systems.
- For Use With SAE J844 Type A Or B Nylon Tubing .
- Meets Fm Vss 571.106 Requirements.
- Tube Outside Diameter: 1/4
- Thread Size: 7/16-24
- Cross Reference: 1460 X 4
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
A/B Sleeve 1/4
Name | Item | Description | |
---|---|---|---|
UNSPSC CODES | 27131600 | Air fittings and connectors | |
VMRS (ATA) CODES | 053-008-004 | A/B SLV 1460X4 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here