Share
Print
Hover over image to magnify
Technical Specifications
Angle
Straight
Mfr. Part Number
725360
Brand
APPROVED SUPPLIER
Nominal Hole Size
3/8 in.
Fitting Thread Style
Self-Forming Thread
Pack Quantity
25
Hex Size
7/16 in.
System of Measurement
Fractional
Item
Grease Fitting
Thread Size
1/8"-27
Product Description
Standard Self-Forming Thread Straight Grease Fitting
- A Special Hardened Thread Allows The Fitting To Be Screwed Into A Plain Hole (Nominal Hole Size .375").
- If Replacement Is Required For Self-Forming Thread Grease Fittings, Use Standard 1/4-28 Threaded Fittings.
- Hex: 7/16
- Size: 1/8-27 Special Taper Thread
- Use In Heat-Treated Parts Is Not Recommended.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot Tracked Item Details
Item Barcode
Grease Fit 1/8 Strt Selftap
| Name | Item | Description | |
|---|---|---|---|
|
UNSPSC CODES | 40141736 | GREASE FIT. SELF-TAP STR |
|
VMRS (ATA) CODES | 053-007-022 | Grease Fitting - General Purpose |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here