Share
Print
Phillips Pan Head Self-Drilling Tek Screw, #10-16 x 1-1/2", Zinc Plated, Steel, 100 PK
Hover over image to magnify
Technical Specifications
Basic Material
Steel
Pack Quantity
100
Brand
APPROVED SUPPLIER
Point
Self-Drilling
Diameter
#10
Point Length
0.203 in.
Driver Size
#2
Recommended Material Thickness
0.035 - 0.110 in.
Finish
Zinc Plated
Self-Drilling Screw Drive Type
Phillips
Item
Tek Screw
Self-Drilling Screw Head Type
Pan
Length Under Head
1-1/2 in.
Shipping Weight
0.9 lb.
Material
Steel
System of Measurement
Fractional
Meets Standards
Meets ASTM A 510 for carbon steel manufacturing. Zinc plating meets ASTM B-117 for salt spray corrosion. Meets SAE J78 for performance and dimensional specifications.
Thread Size
#10-16
Product Description
Phillips Pan Head Self-Drilling Tek Screw
- Self-Drilling And Self-Tapping Screw.
- No Pre-Drilling Is Necessary.
- Zinc Plated.
- Size: 10
- Length: 1-1/2
Compliance & Restrictions
Lot Tracked Item Details
Item Barcode
10 X 1-1/2 Tek Screw, Phl Head
| Name | Item | Description | |
|---|---|---|---|
|
UNSPSC CODES | 31161507 | PH TEK SCREW 10X1 1/2 |
|
VMRS (ATA) CODES | 053-007-006 | PH TEK SCREW 10X1 1/2 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here