Grade 5 USS Hex Head Cap Screw, 9/16"-12 x 1", Zinc Plated, Steel, 50 PK
Thread Pitch: 9/16-12 UNC
- Grade 5 USS Hex Head Cap Screw.
- Conforms To SAE Grade 5 Physical And Mechanical Specifications.
- Zinc Plated For Corrosion Resistance. Technical Data Material And Mechanical Properties Of SAE J429 Dimensions: Ansi/Asme B18.2.1 Hex Head Cap Screws Tensile: 1/4" - 1" Nominal Diameter 120,000 PSI (Minimum) Over 1" Nominal Diameter 105,000 PSI (Minimum) Proof Load: 1/4" - 1" Nominal Diameter 85,000 Psi; Over 1" Nominal Diameter 74,000 PSI Threads: Radius Root Class 2A To Ansi/Asme B1.1 Hardness: 1/4" - 1" Nominal Diameter Rockwell C25-C34; Over 1" Nominal Diameter C19-C30 Decarburation: SAE J121 Discontinuities: SAE J1061 Guide For Thread Length On Partially Threaded Bolts. For Bolts Under 6": Twice The Bolt Diameter Plus A 1/4". For Bolts Over 6": Twice The Bolt Diameter Plus A 1/2". This Gives You The Approximate Bolt Thread Length Available.
Compliance & RestrictionsWARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot tracked item
|UNSPSC CODES||31161501||HX CP PL USS 9/16X1 5|
|VMRS (ATA) CODES||053-007-005||HX CP PL USS 9/16X1 5|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here