7" Hyd Hose Saw 110 V
- With the Clean-Cuts hydraulic hose saws, the hose is positioned across two pins and moved into the blade by a feed foot, using a pulldown handle for better leverage on heavy hose. The feed motion causes the hose to stretch at the point of contact with the blade, allowing it to separate as it is cut. This separation allows the hose to pass clear of the saw blade with NO friction, NO heating and NO DEBRIS! A vacuum hose is attached to a vacuum port to remove any tiny amount of debris or smoke during cutting. Improved safety using a 110V on/ off switch with a magnetic contactor. When power is lost, the saw will not turn back on independently.
- Replacement blades available
- Advanced Scalloped Blade Part No. 4721
- Micro-Slotted Blade Part No. 4720
Compliance & RestrictionsLot tracked item
|VMRS (ATA) CODES||053-006-009||HYD SAW HYDM70-110V|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here