Share
Print
DAYTON
Dayton Recessed Electric Wall-Mount Heater: 1,800W, 120V AC, 1-phase, Bronze
Hover over image to magnify
#938873-7 | Pkg Qty: 1
$444.55 pkg | $444.55 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
cULus
Mfr. Part Number
2HAC6
Air Flow
65 cfm
Mfr. Warranty Length
1 yr.
Amperage
15 A
Mount Type
Recessed or Surface
Amps AC
15
Mounting Location
Wall
Brand
DAYTON
Mounting Type
Surface and Recessed
BtuH
6142
Package Quantity
1
Color Family
Bronze
Phase
1
Control Type
Mechanical Selector Dial
Programming Capability
Not Programmable
Finish
Baked Enamel
Requires
Proper Gauge Wire for Distance From Heater to Breaker Panel for Load
Frequency
60 Hz
Shipping Weight
10.43 lb.
Heating Capacity
6,142 BtuH
Tamper Resistant
Yes
Heating Method
Fan Forced
Type
Architectural Commercial
Housing Depth
3-3/4 in.
Voltage
120 VAC
Housing Height
11 in.
Wall Opening Depth
3-3/4 in.
Housing Material
Steel
Wall Opening Height
11 in.
Housing Width
9-1/4 in.
Wall Opening Width
9-3/16 in.
Hz
60
Warranty
2ACC8
Item
Recessed Electric Wall-Mount Heater
Watts
1800
General
Air Temp. Rise
71 Degrees F
Nominal Voltage - HVAC
120V AC
Automatic Fan Delay (On/Off)
Yes
Remote Control Functions
No Remote Control Included
Disconnect Switch
Yes
Rough-In Depth
3 3/4 in
Grille Depth
1 1/2 in
Rough-In Dimensions - H x W x D
11 in x 9-3/16 in x 3-3/4 in
Grille Finish
Enamel
Rough-In Height
11 in
Grille Height
12 1/8 in
Rough-In Width
9 3/16 in
Grille Material
Steel
Smart Connectivity
No Connectivity
Grille Width
10 3/4 in
Thermal Overheat Protection
Automatic Reset
Heater Mounting Position
Horizontal Burn
Thermostat Contact Type
Single Pole
Includes
Built-in Thermal Cutout, Fan Delay Switch
Thermostat Included
Unit-Mounted
Key Features
Mechanical Controls, Overheat Protection, Tamper Resistant
Voltage, Phase
120V AC, 1-phase
Minimum Mounting Distance from Ceiling
12 in
Wattage Field Convertible
Yes
Minimum Mounting Height from Floor
4 in
Wattage Output
1,800W
Product Description
Compact recessed electric wall heaters heat areas with limited installation or mounting space, like restrooms, bedrooms, hallways, or offices. These fan-forced heaters install in an opening in the wall near the floor so heat flows into the space to be heated. They have a built-in thermostat.
Item Barcode
Cmpct Recssd Elct Wl Heatr,11"
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2HAC6 | |
 | UNSPSC CODES | 40101819 | |
 | VMRS (ATA) CODES | 053-006-009 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here