Share
Print
FILL-RITE
Electric Operated Drum Pump, Unmetered Dispensing with Automatic Shut-Off, 115V AC
Hover over image to magnify
#937975-7 | Pkg Qty: 1
$780.14 pkg | $780.14 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Adapter Material
Nylon
Nozzle Type
Automatic
Adapter Type
3/4" HB
Outlet Size
3/4"
Agency Compliance
ETL
Package Quantity
1
Bearing Type
Ball
Phase
1
Brand
FILL-RITE
Plug Type
Type B
Bypass Valve
Internal
Power Source
Electric
Discharge Tube Length
20 ft.
Pressure Range
38 psi
Duty
Intermittent
Pump Body Material
Stainless Steel
Duty Cycle
Intermittent
Pump Design
Diaphragm Wobble Plate
Food Grade
No
RPM
3400
Full Load Amps
2.4
Seal Material
EPDM
GPM
8
Seal Type
O-Ring
Gasket Material
EPDM
Self-Priming
Yes
Inlet
3/4" MBSPP
Shaft Material
Stainless Steel
Inlet Size
3/4"
Shipping Weight
35 lb.
Metered
No
Spout Material
Stainless Steel
Mfr. Part Number
DF120DAN520
Suction Lift
6 ft.
Mfr. Warranty Length
2 yr.
Suction Tube Type
Flexible Hose
Motor Enclosure
TEFC
Variable Speed
No
Motor RPM
3,400 RPM
Voltage
120 VAC
Motor Type
Capacitor Start
Wetted Materials
EPDM, Nylon, Santoprene, Stainless Steel
Nozzle Material
Poly, Stainless Steel
General
Application
Dispensing Diesel Fuel
Max. Flow Rate
10 gpm
Compatible Chemicals
DEF
Max. Fluid Temp.
120 Degrees F
Diesel Exhaust Fluid Compatible
Yes
Max. Head - Pumps
30 ft
Discharge Connection Type
BSP
Max. Head Pressure
38 psi
Discharge Tube Outlet ID
3/4 in
Max. Outlet Pressure
38 psi
Discharge Tube Outlet OD
1 in
Max. Viscosity
40 cps
Features
Integral Pulsation Dampener, Pump Mounted to Drum Bracket, Smooth Flow
Min. Fluid Temp.
15 Degrees F
For Container Size
55 gal, 275 gal, 330 gal
Noise Level
80 db
For Container Type
Drum, Tote
Nominal Voltage
110V AC
For Media Type
DEF
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Antifreeze (Coolant), Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, Deionized Water, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Ethylene Glycol, Fertilizers, Formic Acid, Fresh Water, Fungicides, Gasoline, Glycerin, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Use With
Diesel Exhaust Fluid
Nozzle Operation
Automatic
Frequency (Hz)
60
Number of Phases
1
Height Above Container
2 1/2 in
Pump Connection ID
3/4 in
Hose Cover Material
EPDM
Pump Connection OD
1 in
Hose Inside Dia.
3/4 in
Pump Connection Type
BSP
Hose Outside Dia.
1 in
Pump Package Type
Unmetered Dispensing with Automatic Shut-Off
Hose Tube Material
EPDM
Rated Voltage
115V AC
Housing Material - Pumps
Polypropylene
Runs Dry
Yes
Includes
(2) 1 in BSPP x 3/4 in Hose Barb 90° Elbows, (2) 1 in BSPP x 3/4 in Hose Barb Straight Fittings, (4) Worm Gear Hose Clamps, Nozzle Boot with Bracket
Spout Connection Type
BSP
Includes Bung Adapter
No
Spout Discharge Size
1/2 in
Includes Discharge Hose
Yes
Suction Tube ID
3/4 in
Includes Nozzle
Yes
Suction Tube Material
EPDM
Includes Spout
Yes
Suction Tube OD
1 in
Includes Suction Tube
Yes
Product Description
Acid, base, and solvent electric drum pumps are made with corrosion-resistant materials that withstand a range of acidic and basic chemical concentrations. They are used to dispense and transfer moderate to large volumes of substances and solutions in laboratories and chemical processing plants.
Item Barcode
Electric Drum Pump,115VAC,10
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 454Z75 | |
 | UNSPSC CODES | 40151532 | |
 | VMRS (ATA) CODES | 053-006-009 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here