Share  
Print  
MAXIM

Hydraulic Power Unit, 1.6 HP, 12VDC, Max. Pressure 2500 psi, 1.3 gpm, Reservoir Capacity 3 gal.

Hover over image to magnify
Hydraulic Power Unit,1Stage,
PI_Asset_1758056
PI_Asset_1762556
Hydraulic Power Unit,1Stage,
PI_Asset_1758056
PI_Asset_1762556

#930805-6 | Pkg Qty: 1

$915.38 pkg | $915.38 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Brand
MAXIM
Package Quantity
1
Cord Length
10 ft.
RPM
2600 RPM
Duty Cycle
Intermittent
Reservoir Capacity
3 gal.
Full Load Amps
325
Shipping Weight
38.3 lb.
Item
Hydraulic Power Unit
Tank Material
Steel
Mfr. Part Number
253147
Voltage
12 VDC
Overall Height
9-3/4 in.
General
Built-In Features
Check Valve
Frame Design - Hydraulic Power Units
Frame Mount
Circuit Design
Double Acting
HP
1.6 hp
Control Station Included
Yes
Hydraulic Pump Type
Gear
Control Station No. of Buttons
2
Max. Pressure
2,500 psi
Control Valve Configuration
4-Way/3-Position
Mounting Orientation - Power Units
Horizontal
Control Valve Type
Solenoid
Nominal Flow
1.3 gpm
Flow @ 1000 psi
1.3 gpm
Power Source - Power Units
DC Power
Flow @ 1500 psi
1.3 gpm
Pressure Port Thread Size
9/16"-18 (SAE 6)
Flow @ 2000 PSI
1.3 gpm
Pump Displacement
2.1 cu- in/rev
Flow @ 2500 psi
1.3 gpm
Pump Stage
1
Flow @ 3000 psi
1.3 gpm
Pump Stage and Type
1 Stage Gear
Flow @ 500 psi
2.5 gpm
Return Port Thread Size
9/16"-18 (SAE 6)

Product Description

Double-acting DC hydraulic power units (HPUs) come with the control valve necessary for operating double-acting cylinders to provide power in two directions (usually up and down). A double-acting HPU and cylinder system allows precise control of upward and downward movement when raising and lowering platforms. By contrast, a single-acting system provides power in one direction only, such as raising a lift and relying on gravity to return the lift to the ground.

DC hydraulic power units (HPUs) are battery-operated and used to power tail-gate lifts, agricultural and marine equipment, dump trailers, and other portable hydraulic tools. They are smaller and more compact than AC power units and can be installed in hard-to-reach areas. DC hydraulic power units can be operated where access to a reliable electrical power source is limited or unavailable. They provide higher amounts of force than traditional electrical and mechanical systems, allowing hydraulic power units to lift and move heavier loads in a smaller footprint. DC hydraulic power units also provide precise movement and speed control over a wide range of speeds and load weights.

Item Barcode
9308056
Hydraulic Power Unit,1Stage,
 NameItemDescription
Grainger DropshipGrainger Dropship35LP41Hydraulic Power Unit,
UNSPSC CODESUNSPSC CODES39121004
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Hydraulic Power Unit,

For more product information by email, click here