Share
Print
DAYTON
120/208 to 240 VAC Cast Iron Sprinkler Pump, 1-Phase, 1-1/2" NPT Inlet Size
Hover over image to magnify
#927227-1 | Pkg Qty: 1
$1,172.95 pkg | $1,172.95 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
Motor Only CSA
Mfr. Part Number
5RWH6
Amps
10.5/5.8-5.3 A
Mfr. Warranty Length
1 yr.
Bearing Type
Double Shielded Pre Lubricated Ball
Minimum GPM @ Head
12 gpm @ 58 ft.
Best Efficiency GPM @ Head
33 @ 55 ft.
Motor Enclosure
TEFC
Brand
DAYTON
Motor Type
Capacitor-Start, Capacitor-Run
Drain Plug
Yes
NEMA/IEC Frame
56J
Duty
Continuous
Outlet
1-1/2 in.
Frame
56J
Outlet Size
1-1/2 in. NPT
GPM @ 10 PSI
39
Pack Quantity
1
GPM @ 15 PSI
37
Phase
1
GPM @ 20 PSI
31
Port Rotation
90 Degrees Increments
GPM @ 25 PSI
27
Pressure Pump Type
Sprinkler Pump
GPM @ 30 PSI
19
RPM
3450
GPM @ 35 PSI
7
Screw Material
Plated Steel
GPM of Water @ 2 Ft. of Head
42
Seal Application
Nonflammable Liquids Compatible with Pump Components
Height
10-11/16 in.
Seal Material
Buna-N, Carbon, Ceramic, Stainless Steel
Horsepower
1/2
Seal Type
Buna-N O-Ring Casing, Mechanical
Housing Material
Cast Iron
Service Factor
1.6
Hz
60
Shaft Material
Stainless Steel
Impeller Material
Stainless Steel
Shipping Weight
61 lb.
Impeller Type
Closed
Shut-Off
80 ft.
Inlet
1-1/2 in.
Stages
1
Inlet Pressure
113 psi
Suction Lift
25 ft.
Item
Sprinkler Pump
Thermal Protection
Automatic Reset
Length
17-1/8 in.
Type
Self-Priming
Maximum Case Pressure
150 psi
Voltage
120/208 to 240 VAC
Maximum Fluid Viscosity
31 SSU
Volute Material
Cast Iron
Maximum Head
64 ft.
Wetted Materials
Cast Iron, Stainless Steel, Buna-N, Carbon, Ceramic
Maximum Pressure
37 psi
Width
8 in.
Maximum Specific Gravity
1
General
Application
Lawn Sprinking, Spraying Irrigation, Draining and General Dewatering Application, Etc.
Includes
Manual
Best Efficiency Flow
33 gpm
Intake Type
NPT
Best Efficiency Head
55 ft of head
Intake and Discharge Size
1 1/2 in , 1 1/2 in
Case Pressure (Maximum)
150 psi
Manufacturer Warranty Length
1 yr
Compatible Discharge Pipe Size
1 1/2 in
Maximum Feet of Head
64 ft
Compatible Intake Pipe Size
1 1/2 in
Motor Ambient Temperature (Maximum)
104 Degrees F
Compatible with Media Type
Non-Flammable Liquids
Motor Enclosure Type
TEFC
Discharge Rotation
90 Degrees Increments
Motor Frame Designation
56J
Discharge Type
NPT
Nameplate Voltage
120/208-240V AC
Features
Removable and Replaceable Volute/Diffusers, Front Drain Plug
Priming
Self-Priming
Flow Rate @ 10 psi
37 gpm
Pump Housing Material
Cast Iron
Flow Rate @ 15 psi
32 gpm
Shut Off Pressure (Maximum)
37 psi
Flow Rate @ 20 psi
28 gpm
Specific Gravity (Maximum)
1
Flow Rate @ 30 psi
19
Suction Lift (Maximum)
25 ft
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Thermal Overload Protection
Yes
For Use With Potable Systems
No
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel
Product Description
Featuring built-in thermal overload protection, this sprinkler pump is designed for self-priming applications. It is manually operated and not submersible.
Expertly Selected Product Pairings
Item Barcode
Pump,1/2 Hp,1Ph,120/208 To
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 5RWH6 | Pump,1/2 HP, 1Ph,120/208 |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump,1/2 HP, 1Ph,120/208 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here