Share
Print
DAYTON
Effluent Pump, HP 1, 240 VAC, Intermittent Duty Cycle, Max. Head 109.0 ft.
Hover over image to magnify
#927092-2 | Pkg Qty: 1
$1,359.48 pkg | $1,359.48 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
8.3 A
Impeller Material
Polypropylene
Base Material
Cast Iron
Input Phase AC
1
Bearing Type
Ball
Item
Submersible Effluent Pump
Brand
DAYTON
Length
16-3/4 in.
Cord Length
20 in.
Maximum Diameter Solids
3/4 in.
Diameter
12-3/16 in.
Maximum Head
109 ft.
Discharge NPT
2 in.
Maximum Liquid Temperature
104°F
Duty
Intermittent
Maximum Temperature (Deg. F)
104
GPM of Water @ 10 Ft. of Head
85
Mechanical Seal
SiC/Buna
GPM of Water @ 100 Ft. of Head
12
Mfr. Part Number
4HU77
GPM of Water @ 15 Ft. of Head
83
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 20 Ft. of Head
80
Motor RPM
3450
GPM of Water @ 25 Ft. of Head
78
Motor Type
Oil Filled PSC
GPM of Water @ 30 Ft. of Head
74
Operation Type
Manual
GPM of Water @ 35 Ft. of Head
71
Package Quantity
1
GPM of Water @ 40 Ft. of Head
68
Phase
1
GPM of Water @ 45 Ft. of Head
64
Pump Body Material
Cast Iron
GPM of Water @ 5 Ft. of Head
86
Pump HP
1
GPM of Water @ 50 Ft. of Head
60
Pump RPM
3450
GPM of Water @ 55 Ft. of Head
56
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 60 Ft. of Head
52
RPM
3450
GPM of Water @ 70 Ft. of Head
44
Shaft Seal
Silicon Carbide/Buna N
GPM of Water @ 80 Ft. of Head
34
Shaft Seal Material
Buna-N, Silicon Carbide
GPM of Water @ 90 Ft. of Head
22
Shipping Weight
82.8 lb.
Handle
Yes
Switch Type
None
Height
16-3/4 in.
Top Material
Cast Iron
Horsepower
1
Type
Manual Operation (Switch Not Included)
Housing
Cast Iron
Voltage
240 VAC
Housing Material
Cast Iron
Width
12-1/6 in.
Hz
60
General
Body Dia.
12 3/16 in
Min. Sump Pit Dia.
18 in
Discharge Dia.
2 in
Minimum Water Depth
18 in
Flow Rate @ 10 Ft. of Head
85 gpm
Nominal Voltage
220V AC
Flow Rate @ 100 Ft. of Head
12 gpm
Phase - Pumps
1
Flow Rate @ 15 Ft. of Head
83 gpm
Rated Voltage
240V AC
Flow Rate @ 20 Ft. of Head
80 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 40 Ft. of Head
68 gpm
Switch Actuation
No Switch Included
Flow Rate @ 60 Ft. of Head
52 gpm
Switch Electrical Connection
No Switch Included
Flow Rate @ 80 Ft. of Head
34 gpm
Width at Widest Point
12 1/6 in
HP
1
Product Description
These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Effluent,1 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4HU77 | Pump, Effluent,1 HP |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Effluent,1 HP |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here