9/16"-12, Tap, Right Hand, Plug, 3 Flutes, High Speed Steel, Oxide Tap Finish
These taps have a unified thread standard. UN coarse (UNC) taps have fewer threads per inch than UN fine (UNF) taps. Compared to UNF taps, UNC taps perform better in threading applications on brittle materials and are less likely to cross thread. Coarse threads can also withstand more physical abuse than fine threads. UNF taps have more threads per inch than UNC taps. Compared to UNC taps, UNF taps perform better in threading applications on thin-walled workpieces and hard materials. Fine threads provide more tensile strength and shear strength than coarse threads. The black-oxide finish on these taps retains lubricants to improve the taps' wear resistance and chip flow. Black-oxide taps should only be used on ferrous metals.
Compliance & RestrictionsWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
|Grainger Dropship||2PHY7||Tap,Plug,9/ 16"-12,Oxide,|
|VMRS (ATA) CODES||053-006-009||Tap,Plug,9/ 16"-12,Oxide,|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here