Share
Print
GOULDS WATER TECHNOLOGY
Effluent Pump, HP 1/3, 120VAC, Continuous Duty Cycle, Max. Head 29.0 ft.
Hover over image to magnify
#926313-7 | Pkg Qty: 1
$908.50 pkg | $908.50 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
UL 778, CSA C22.2 108
Length
8-1/2 in.
Amps
10.7 A
Maximum Diameter Solids
3/4 in.
Base Material
Cast Iron
Maximum Head
30 ft.
Bearing Type
Ball
Maximum Liquid Temperature
140°F
Brand
GOULDS WATER TECHNOLOGY
Maximum Temperature (Deg. F)
140
Cord Length
20 ft.
Mechanical Seal
Stainless Steel/Silicon Carbide/Buna-N
Diameter
11-1/2 in.
Mfr. Part Number
WE0311M
Discharge NPT
2 in.
Minimum Sump Pit Diameter
18 in.
Duty
Continuous
Motor RPM
1750
GPM of Water @ 10 Ft. of Head
63
Motor Type
Oil Filled Capacitor Start
GPM of Water @ 15 Ft. of Head
52
Operation Type
Manual
GPM of Water @ 20 Ft. of Head
35
Pack Quantity
1
GPM of Water @ 25 Ft. of Head
15
Phase
1
GPM of Water @ 30 Ft. of Head
0
Pump Body Material
Cast Iron
GPM of Water @ 40 Ft. of Head
59
Pump HP
1/3
GPM of Water @ 5 Ft. of Head
0
Pump RPM
1750
GPM of Water @ 50 Ft. of Head
45
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 60 Ft. of Head
32
RPM
1750
GPM of Water @ 70 Ft. of Head
20
Shaft Material
Stainless Steel
GPM of Water @ 80 Ft. of Head
9
Shaft Seal
Stainless Steel, Buna-N, Silicon Carbide
Handle
Yes
Shaft Seal Material
Buna-N, Silicon Carbide, Stainless Steel
Height
16 in.
Shipping Weight
70 lb.
Horsepower
1/3
Switch Type
None
Housing
Cast Iron
Thermal Protection
Thermal Protection
Housing Material
Cast Iron
Top Material
Cast Iron
Hz
60
Type
Manual Operation (Switch Not Included)
Impeller Material
Cast Iron
Voltage
120 VAC
Input Phase AC
1
Warranty
2ACD2
Item
Submersible Effluent Pump
Width
8-1/2 in.
General
Body Dia.
11 1/2 in
Minimum Water Depth
18 in
Discharge Dia.
2 in
Nominal Voltage
110V AC
Discharge Gender
Female
Phase - Pumps
1
Discharge Standard
NPT
Rated Voltage
120V AC
Flow Rate @ 10 Ft. of Head
65 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide, Stainless Steel
Flow Rate @ 15 Ft. of Head
52 gpm
Standards
UL 778, CSA C22.2 108
Flow Rate @ 20 Ft. of Head
33 gpm
Switch Actuation
No Switch Included
Includes
1-1/2" FNPT Flange
Switch Electrical Connection
No Switch Included
Min. Sump Pit Dia.
18 in
Width at Widest Point
8 1/2 in
Product Description
These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Documents
Item Barcode
Submersible Effluent Pump,1/
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2NUZ6 | Submersible Effluent |
 | UNSPSC CODES | 40151510 | |
 | VMRS (ATA) CODES | 053-006-009 | Submersible Effluent |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here