Starrett 0-6" Range Stainless Steel Inch Dial Caliper with 0.001" Graduations
These calipers are made of hardened steel or stainless steel and are appropriate for most general purpose and heavy duty applications. They have a graduated dial that displays measurements in decimal inches with typical resolution being 0.001” or 0.005”. Select models may have a second fractional inch scale with 1/64" graduations. Dial calipers use adjustable jaws that slide along a beam to measure between two opposite sides of a tool or part. They are easier to read than vernier calipers and are commonly used in light and heavy manufacturing production, machine and woodworking shops.
|Grainger Dropship||2ZUF2||Dial Caliper w/Case,6 In,|
|VMRS (ATA) CODES||053-006-009||Dial Caliper w/Case,6 In,|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here