Share
Print
LIBERTY PUMPS
2 HP Grinder Pump, CSCR Motor, 185 ft. Max Head, Silicon Carbide, Viton Shaft Seal
Hover over image to magnify
#924656-7 | Pkg Qty: 1
$2,905.52 pkg | $2,905.52 ea
Pricing is subject to change without notice
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
CSA, C-US
GPM of Water @ 90 Ft. of Head
29
Amps
15 A
Handle
Yes
Base Material
Cast Iron
Height
19-1/2 in.
Bearing Type
Upper and Lower Ball
Horsepower
2
Brand
LIBERTY PUMPS
Housing Material
Cast Iron
Cord Length
25 ft.
Hz
60Hz
Diameter
9-1/2
Impeller Material
Stainless Steel
Discharge NPT
1-1/4 in. F
Input Phase AC
1
Duty
Intermittent
Item
Grinder Pump
GPM of Water @ 10 Ft. of Head
39
Maximum Head
185 ft.
GPM of Water @ 100 Ft. of Head
26
Maximum Liquid Temperature
140°F
GPM of Water @ 110 Ft. of Head
23
Maximum Temperature (Deg. F)
140
GPM of Water @ 120 Ft. of Head
20
Mfr. Part Number
LSGX202A
GPM of Water @ 130 Ft. of Head
16
Mfr. Warranty Length
3 Yr.
GPM of Water @ 140 Ft. of Head
14
Minimum Sump Pit Diameter
24 in.
GPM of Water @ 15 Ft. of Head
39
Motor RPM
3450
GPM of Water @ 150 Ft. of Head
11
Motor Type
CSCR
GPM of Water @ 160 Ft. of Head
7
Off Point
8
GPM of Water @ 170 Ft. of Head
4
On Point
15
GPM of Water @ 180 Ft. of Head
2
Package Quantity
1
GPM of Water @ 20 Ft. of Head
39
Phase
1
GPM of Water @ 25 Ft. of Head
39
Pump Body Material
Cast Iron
GPM of Water @ 30 Ft. of Head
39
Pump HP
2
GPM of Water @ 35 Ft. of Head
39
Pump RPM
3450
GPM of Water @ 40 Ft. of Head
39
RPM
3450
GPM of Water @ 45 Ft. of Head
39
Shaft Material
Stainless Steel
GPM of Water @ 5 Ft. of Head
39
Shaft Seal
SiC/DVL
GPM of Water @ 50 Ft. of Head
39
Shaft Seal Material
Silicon Carbide, Viton
GPM of Water @ 55 Ft. of Head
38
Shipping Weight
94 lb.
GPM of Water @ 60 Ft. of Head
39
Switch Type
Tether
GPM of Water @ 70 Ft. of Head
36
Thermal Protection
Yes
GPM of Water @ 80 Ft. of Head
33
Voltage
208 to 240 VAC
General
Discharge Dia.
1 1/4 in
Max. Diameter Solids
2 in
Discharge Gender
Female
Min. Sump Pit Dia.
24 in
Discharge Standard
NPT
Phase - Pumps
1
Flow Rate @ 10 Ft. of Head
39 gpm
Rated Voltage
208 to 230V AC
Flow Rate @ 15 Ft. of Head
39 gpm
Shaft Seal Material - Pumps
Silicon Carbide, Viton
Flow Rate @ 20 Ft. of Head
39 gpm
Standards
CSA, C-US
Flow Rate @ 40 Ft. of Head
39 gpm
Switch Actuation
Tether Float
Flow Rate @ 60 Ft. of Head
39 gpm
Switch Electrical Connection
Piggyback
HP
2 hp
Product Description
These general purpose single-phase 200 to 240V sewage grinder pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They shred large particles into small fragments so the waste can be pumped into a sewage system.
Expertly Selected Product Pairings
Item Barcode
Grinder Pump, 208-230V, 15
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2WMN7 | Grinder Pump, 208-230V, |
 | UNSPSC CODES | 40151517 | |
 | VMRS (ATA) CODES | 053-006-009 | Grinder Pump, 208-230V, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here