Vibration Damping Mount,13-3/4 In. L
Vibrasorb® Vibration Damping Mounts facilitate optimal use and help protect electromechanical and optical equipment from excessive wear and even structural damage that can be caused by exposure to vibration. Molded of dense black & white terrazzo, these 6.4cm (2½") thick platforms are supported on four Vibro-Absorber™ cushions with neoprene feet and support up to 16kg (35 lb). The larger size will absorb vibrations down to 13 Hz with a 16kg (35lb) load, while the smaller size will absorb vibrations down to 16 Hz. with a 16kg (35lb) load. With lighter loads, the minimum frequency of damping for both sizes will increase to a value between 16 Hz. and 25 Hz. Both sizes feature a polished surface that resists scratches and chemical attack.
|Grainger Dropship||9JZN0||Vibration Damping|
|VMRS (ATA) CODES||053-006-009|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here