Steel Strapping Tensioner, Feed Wheel, For Use With Steel, For Strapping Width 9181814/4" to 9180890-9180890/4
Manual tensioners for steel strapping can be brought to the work location and do not require an external power source or attachments. They are used for low-volume applications or where access to a power source is limited. The operator pushes a lever to tighten straps before a seal is applied using a sealing tool.
Tensioner tools for steel strapping pull the ends of the strapping to secure the strap around the bundle before sealing the ends together. Steel and zinc-coated steel strapping bands are used to secure heavy loads or loads with irregular or rough edges, such as cement blocks, lumber, and machinery.
|Grainger Dropship||9ADJ8||Steel Strapping|
|VMRS (ATA) CODES||053-006-009|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here