Jet 3/4 Motor HP Floor Drill Press, Belt Drive Type, 16-7/8" Swing, 115 Voltage
#922552-9 | Pkg Qty: 1
General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 16 7/8 in, Spindle Taper 2MT, Motor HP 3/4 hp, Capacity Steel 3/4 in, Capacity Cast Iron Not Specified, Drilling Capacity Wood 2 in, Power Down Feed Included No, Voltage 115, Number of Speeds 16, Chuck Size 5/8 in, Spindle Speed 210 to 3500 rpm, Spindle Travel 5 in, Base Size 20 in x 12-5/8 in, Table Work Surface 14 in x 19 in, Hz 60, Phase 1, Number of T-Slots 2, Table Slot Size 5/8 in, Column Dia. 3 5/32 in
|Grainger Dropship||45CA74||Floor Drill Press,Belt,|
|VMRS (ATA) CODES||053-006-009||Floor Drill Press,Belt,|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here