Share
Print
GOULDS
Sewage Ejector Pump, HP 1/2, Flow Rate @ 10 Ft. of Head 63.0 gpm, Discharge 2" FNPT
Hover over image to magnify
#920362-5 | Pkg Qty: 1
$734.79 pkg | $734.79 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
CSA
Maximum Liquid Temperature
140°F
Base Material
Glass Filled Nylon
Mechanical Seal
Carbon-Rotary/Ceramic-Stationary, Buna N Elastomers
Bearing Type
Ball
Mfr. Part Number
WW0511
Body Material
Cast Iron
Minimum Sump Pit Diameter
18 in.
Brand
GOULDS
Motor RPM
1550
Cord Length
10 ft.
Motor Type
Single Phase
Diameter
10-1/2 in.
Off Point
Manual
Discharge
2 in. FNPT
On Point
Manual
Discharge NPT
2 in. F
Overall Height
12-15/16 in.
Duty
Continuous
Pack Quantity
1
Duty Cycle
Continuous
Pump Body Material
Cast Iron
Engine RPM
1550
Pump HP
1/2
GPM of Water @ 10 Ft. of Head
63
RPM
1550 RPM
GPM of Water @ 15 Ft. of Head
28
Shaft Material
Stainless Steel
Height
12-15/16 in.
Shaft Seal
Carbon-Rotary/Ceramic-Stationary, Buna N Elastomers
Horsepower
1/2
Shaft Seal Material
Buna-N, Carbon, Ceramic
Housing
Cast Iron
Shipping Weight
24 lb.
Housing Material
Cast Iron
Switch Type
None
Impeller Material
Thermoplastic
Thermal Protection
Yes
Item
Submersible Sewage Pumps
Top Material
Rugged Glass Filled Thermoplastic
Maximum Diameter Solids
2 in.
Voltage
120 VAC
Maximum Head
18 ft.
General
Body Dia.
10 1/2 in
Min. Sump Pit Dia.
18 in
Discharge Dia.
2 in
Nominal Voltage
110V AC
Discharge Gender
Female
Rated Voltage
115V AC
Discharge Standard
NPT
Shaft Seal Material - Pumps
Carbon, Ceramic, Nitrile Rubber
Features
Upper and Lower Heavy Duty Ball Bearing Construction, Stainless Steel Fasteners, Power Cable Severe Duty Rated Oil and Water Resistant
Standards
CSA
Flow Rate @ 10 Ft. of Head
63 gpm
Switch Actuation
No Switch Included
Flow Rate @ 15 Ft. of Head
28 gpm
Switch Electrical Connection
No Switch Included
Max. Liquid Temp.
104 Degrees F (Continuous), 140 Degrees F (Intermittent)
Product Description
These general purpose 110 to 120V sewage ejector pumps remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They are compatible with most standard U.S. residential electrical wall outlets.
Expertly Selected Product Pairings
Item Barcode
Sub Sewage Pumps,1/2 Hp,10 Ft.
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 40GT81 | Sub Sewage Pumps,1/2 HP, |
 | UNSPSC CODES | 40151513 | |
 | VMRS (ATA) CODES | 053-006-009 | Sub Sewage Pumps,1/2 HP, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here