3M

3M 1 qt. Nonflammable, Water Based Contact Adhesive, Neutral

Hover over image to magnify
Adhesive,Contact,1 Qt
Adhesive,Contact,1 Qt

#920192-1 | Pkg Qty: 1

$72.43 pkg | $72.43 ea

Technical Specifications

Key Specifications
Application
Formed plastics, Plastic laminate, Wood, Plywood, Wood veneer, Canvas
Item
Fastbond(TM) Contact Adhesive
Application Method
Brush On, Roll On
Materials Bonded
Foam, Laminate, Plastic, Wood
Begins to Harden
Up to 4 Hrs.
Mfr. Part Number
21180
Brand
3M
Pack Quantity
1
Characteristics
Water Dispersed, High Strength Contact Adhesive Changes Color from Blue to Green When Dry, Apply with Spray, Roller, Brush, Non-flammable in the Wet State, Low VOC Content
Product Size
1 qt.
Color Family
Neutral
Shipping Weight
2-1/2 lb.
Container Size
1 qt.
Standards
MIL-A-24179-A
Container Type
Jug
Subgroup | Contact Cement
3M Contact Cements
Features
Long Bonding Range, Water-Based
Substrates
Most Foam Plastics, Plastic Laminate, Wood Plywood Veneer, Canvas, Metal
Flammable
No
Temperature Range (Deg. F)
-40 to 225 deg. F
Functional Cure
24 Hrs.
Type
Nonflammable, Water Based
Green Certification/Other Recognition
GREENGUARD® Certified
Work Life
Up to 4 Hrs.
Green Environmental
Does Not Contain Methylene Chloride, Meets SCAQMD Requirements
General
Consistency
Thin Liquid
Secondary Compatible Materials
Ceramic and Porcelain, Foam and Fabric, Glass and Fiberglass, Leather, Metals, Plastics, Rubber
Flammability
Nonflammable
VOC Content Range
Under 100 g/L
For Surface Type
Porous or Non-Porous
VOC Content Weight
Less Than 80 g/L
Low Odor
Yes
Water Resistance
Water-Resistant
Maximum Application Temperature
65 Degrees F
Working Time
30 min
Maximum Performance Temperature
180 Degrees F
Working Time Grade
Standard Working Time
Primary Application
For General Purpose

Product Description

3M™ Fastbond™ Contact Adhesive 30-NF is a high water-dispersed sprayable contact adhesive for high immediate bond strength and long bonding range. Neutral adhesive dries to clear. Nonflammable in wet state. Post-formable and heat resistant. Coverage (@ 3 g. per ft. 2 g. dry wt.): 680 sq. ft. per gal. Coverage is dependent upon porosity of the substrate and the method by which the adhesive is applied. Use 2.5-3.5 g. per ft. 2 g. of dry adhesive per surface for wood, particle board and high-pressure laminates with the adhesive applied by spray or roller. More adhesive (lower coverage) is recommended if very soft wood, fabrics, foams, etc. are to be bonded, or if the adhesive is applied by brushing.

Compliance & Restrictions

SDS Available
SDS Available View
Item Barcode
9201921
Adhesive,Contact,1 Qt
  Name Item Description
Grainger Dropship Grainger Dropship 3XH47 Adhesive, Contact,1 Qt
UNSPSC CODES UNSPSC CODES 31201601
VMRS (ATA) CODES VMRS (ATA) CODES 053-999-075 Adhesive, Contact,1 Qt

For more product information by email, click here