Share  
Print  
TSURUMI

1 HP Submersible Dewatering Pump with 120VAC Voltage and Discharge NPT 2", 50 ft. Cord Length

Hover over image to magnify
Submersible Dewatering Pump,1
Submersible Dewatering Pump,1

#917794-4 | Pkg Qty: 1

$982.71 pkg | $982.71 ea

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Agency Compliance
Etl/Cetl
Input Phase AC
1
Amps
9.6
Insulation Class
E
Base Material
Steel
Item
Submersible Dewatering Pump
Bearing Type
Double Shielded, Permanently Lubricated, High Temperature C3 Ball Bearings Rated for a B-10 Life
Length
13-7/16 in.
Body Material
Aluminum
Maximum Diameter Solids
1/4 in.
Brand
TSURUMI
Maximum Head
59 ft.
Cord Length
50 ft.
Maximum Liquid Temperature
104°F
Cord Size
14/3
Mfr. Part Number
LB-800
Cord Type
3-Conductor STOW, Resists Water and Oil
Mfr. Warranty Length
2 yr.
Diameter
7-9/16 in.
Minimum Sump Pit Diameter
12 in.
Discharge
2 in. MNPT
Motor Housing
Die Cast Aluminum
Discharge NPT
2 in.
Motor RPM
3300
Duty
Continuous
Motor Type
PSC
Duty Cycle
Continuous
Overall Height
13-7/16 in.
Function
Dewatering
Package Quantity
1
GPM @ 1 Ft. of Head
82
Phase
1
GPM of Water @ 10 Ft. of Head
77
Pump HP
1
GPM of Water @ 15 Ft. of Head
72
Pump RPM
3300
GPM of Water @ 20 Ft. of Head
67
Pump Type
Construction Site and Residential Dewatering
GPM of Water @ 25 Ft. of Head
60
RPM
3300 RPM
GPM of Water @ 30 Ft. of Head
53
Shaft Material
Stainless Steel
GPM of Water @ 35 Ft. of Head
45
Shaft Seal
Silicone Carbide
GPM of Water @ 40 Ft. of Head
37
Shaft Seal Material
Silicone Carbide
GPM of Water @ 45 Ft. of Head
28
Shipping Weight
35 lb.
GPM of Water @ 5 Ft. of Head
82
Suction
Screened Bottom
Handle
Top Carrying
Switch Type
No Switch Included
Height
13-7/16 in.
Thermal Protection
Automatic
Horsepower
1
Top Material
Die Cast Aluminum
Housing
Die Cast Aluminum
Type
Construction Site and Residential Dewatering
Housing Material
Die Cast Aluminum
Voltage
120 VAC
Hz
60
Warranty
2 Years
Impeller Material
Urethane Rubber
Width
7-9/16 in.
General
Application
Nonflammable Liquids
HP
1
Body Dia.
7 9/16 in
Max. Liquid Temp.
104 Degrees F
Discharge Dia.
2 in
Min. Sump Pit Dia.
12 in
Discharge Gender
Male
Minimum Water Depth
12 in
Discharge Standard
NPT
Nominal Voltage
110V AC
Features
Dewatering
Phase - Pumps
1
Flow Rate @ 10 Ft. of Head
77 gpm
Rated Voltage
115V AC
Flow Rate @ 15 Ft. of Head
72 gpm
Shaft Seal Material - Pumps
Silicone Carbide
Flow Rate @ 20 Ft. of Head
67 gpm
Switch Actuation
No Switch Included
Flow Rate @ 5 Ft. of Head
82 gpm
Width at Widest Point
7 9/16 in
For Use With
Nonflammable Liquids

Product Description

These 110 to 120V plug-in utility and dewatering pumps transfer moderate amounts of water on jobsites. Some pumps come with a switch for automatic on/off operation, while other models allow installation of an automatic switch. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.

Item Barcode
9177944
Submersible Dewatering Pump,1
 NameItemDescription
Grainger DropshipGrainger Dropship38H468Submersible Dewatering
UNSPSC CODESUNSPSC CODES40151531
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Submersible Dewatering

For more product information by email, click here