Signode High Tensile Seals, Pusher Seals, Fits Strap Width 3/4", Round Seal Surface Type, Steel, PK 700

Pusher seals secure steel strapping around round surfaces such as pipe, rebar, and other irregular bundles. Sometimes called push seals or push-type seals, they are installed by threading the strapping through the seal, then a tensioning and sealing tool is used to apply tension and secure the seal to the strapping.

Seals for steel strapping are pinched tight around strapping ends to secure them in place. These high-grade galvanized steel seals form a permanent connection to secure heavy loads such as brick, cement blocks, lumber, and rail shipments. A tensioning tool is used to pull the strapping tight and a sealer tool compresses a seal to hold the strapping in place.