Manual Chain Hoist, 10,000 lb. Load Capacity, 10 ft. Hoist Lift, 1-7/8" Hook Opening
1/2- to 30-Ton Manually Operated Hand Chain Hoists with Overload
- Load-tested at 150% capacity Forged alloy steel hooks with cast-steel safety latch and bolt-and-lock nut Weatherproof load-holding Weston-type brake with twin pawl design
- When activated, factory-set overload protection will not let hoist operate, but allows operator to lower load (if lifting) or release load (if pulling). Overload protection resets itself; never needs resetting or recalibrating. Hand-wheel design enables hand chain to feed directly into wheel sprocket from any direction or angle. Lower block has a thrust bearing, allowing easy rotation of a suspended load without twisting load chain. Fully enclosed gearing protects gears from debris and contamination. Gears and shafts run on roller bearings.
- Meet HMI and ANSI/ASME B30.16, CE, AS 1418.2 standards.
|Grainger Dropship||2YAZ5||Manual Chain Hoist,10000|
|VMRS (ATA) CODES||053-006-009||Manual Chain Hoist,10000|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here