Share
Print
DAYTON
3/4 HP Submersible Sump Pump, Tether Switch Type, Stainless Steel Base Material
Hover over image to magnify
#914563-5 | Pkg Qty: 1
$433.16 pkg | $433.16 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Alarm
No
Item
Submersible Sump Pump
Alarm Included
No
Maximum Diameter Solids
3/4 in.
Amps
6.4 A
Maximum Head
26.2 ft.
Base Material
Stainless Steel
Maximum Liquid Temperature
104°F
Bearing Type
Lubricated Ball
Maximum Temperature (Deg. F)
104
Body Material
Stainless Steel
Mechanical Seal
Buna N
Brand
DAYTON
Mfr. Part Number
3YU76
Cord Length
15 ft.
Minimum Sump Pit Diameter
12 in.
Diameter
9-1/2 in.
NEC Cord Designation
SJTW
Discharge
1-1/4 in. MNPT
Off Point
8-1/2 in.
Discharge NPT
1-1/4 in. M
On Point
15-45/64 in.
Duty
Continuous
Overall Height
12 in.
Duty Cycle
Continuous
Package Quantity
1
GPM of Water @ 10 Ft. of Head
34
Pump Body Material
Stainless Steel
GPM of Water @ 15 Ft. of Head
21
Pump HP
3/4
GPM of Water @ 20 Ft. of Head
12
Pump Type
Automatic
GPM of Water @ 25 Ft. of Head
3
Shaft Material
Stainless Steel
GPM of Water @ 5 Ft. of Head
45
Shaft Seal
Buna N
Gauge/Conductor
18/3
Shaft Seal Material
Buna-N
Height
12 in.
Shipping Weight
18.55 lb.
Horsepower
3/4
Sump Pump Item
Submersible Sump Pump
Housing
Stainless Steel
Switch Type
Tether
Housing Material
Stainless Steel
Top Material
Stainless Steel
Hz
60 Hz
Type
Automatic
Impeller Material
Stainless Steel
Voltage
120 VAC
General
Body Dia.
9 1/2 in
Includes
90 Degrees 1 1/4" NPT Discharge Elbow
Discharge Dia.
1 1/4 in
Min. Sump Pit Dia.
12 in
Discharge Gender
Male
Nominal Voltage
110 V AC
Discharge Standard
NPT
Rated Voltage
115V AC
Flow Rate @ 10 Ft. of Head
34 gpm
Shaft Seal Material - Pumps
Buna-N
Flow Rate @ 15 Ft. of Head
21 gpm
Switch Actuation
Tether Float
Flow Rate @ 20 Ft. of Head
12 gpm
Switch Electrical Connection
Piggyback
Flow Rate @ 5 Ft. of Head
45 gpm
Product Description
These 110V stainless steel submersible sump pumps come with a stainless-steel body that is more corrosion resistant than cast iron and are commonly used to drain water in sump pits. Pumps have an unpainted finish.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Sump Pump,3/4 Hp,1-1/4" NPT,15
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 3YU76 | Sump Pump,3/ 4 HP,1-1/4" |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Sump Pump,3/ 4 HP,1-1/4" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here