Share
Print
DAYTON
Effluent Pump, HP 1/2, 240 VAC, Intermittent Duty Cycle, Max. Head 31.0 ft.
Hover over image to magnify
#914366-8 | Pkg Qty: 1
$544.88 pkg | $544.88 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
4.3
Maximum Head
31 ft.
Base Material
Thermoplastic
Maximum Liquid Temperature
104°F
Bearing Type
Ball
Maximum Temperature (Deg. F)
104
Body Material
Cast Iron
Mechanical Seal
SiC/Buna
Brand
DAYTON
Mfr. Part Number
4HU74
Cord Length
20 ft.
Minimum Sump Pit Diameter
18 in.
Diameter
9-1/8 in.
Motor RPM
3450
Discharge
1-1/2 in.
Motor Type
Oil Filled PSC
Discharge NPT
1-1/2 in.
Off Point
4-1/4 in.
Duty
Intermittent
On Point
13-1/4 in.
Duty Cycle
Intermittent
Operation Type
Automatic
GPM of Water @ 10 Ft. of Head
78
Overall Height
13 in.
GPM of Water @ 15 Ft. of Head
65
Package Quantity
1
GPM of Water @ 20 Ft. of Head
52
Phase
1
GPM of Water @ 25 Ft. of Head
35
Pump Body Material
Cast Iron
GPM of Water @ 30 Ft. of Head
10
Pump HP
1/2
GPM of Water @ 5 Ft. of Head
85
Pump RPM
3450
Handle
Yes
Pump Type
Automatic Operation (Switch Included)
Height
13 in.
RPM
3450 RPM
Horsepower
1/2
Shaft Seal
Silicon Carbide/Buna N
Housing
Cast Iron
Shaft Seal Material
Carbon Ceramic
Housing Material
Cast Iron
Shipping Weight
36.95 lb.
Hz
60 Hz
Switch Type
Tether
Impeller Material
Cast Iron
Top Material
Cast Iron
Input Phase AC
1
Type
Automatic Operation (Switch Included)
Item
Submersible Effluent Pump
Voltage
240 VAC
Length
12-3/4 in.
Width
8-1/2 in.
Maximum Diameter Solids
3/4 in.
General
Body Dia.
9 1/8 in
Nominal Voltage
220V AC
Discharge Dia.
1 1/2 in
Phase - Pumps
1
Flow Rate @ 10 Ft. of Head
78 gpm
Rated Voltage
240V AC
Flow Rate @ 15 Ft. of Head
65 gpm
Shaft Seal Material - Pumps
Carbon, Ceramic
Flow Rate @ 20 Ft. of Head
52 gpm
Switch Actuation
Tether Float
Min. Sump Pit Dia.
18 in
Switch Electrical Connection
Piggyback
Minimum Water Depth
18 in
Width at Widest Point
8 1/2 in
Product Description
These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Effluent,1/2 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4HU74 | Pump, Effluent,1/2 |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Effluent,1/2 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here