Filter Element Kit: Particulate, 40 micron, Plastic, PS701P
Piggyback Air Line Filter/Regulators
- 5-micron filter element Polycarbonate bowl: 125°F max. temp.; metal bowl: 150°F max. temp. WARNING: Product rupture can cause serious injury. Do not connect regulator to bottled gas. Note: Should not be used where strong acids or bases are present or in salt-laden atmospheres. General Purpose Filters
- Remove impurities down to 5 microns Feature a heavy-duty bowl with sight glass, manual drain, and a larger surface area for longer life. Note: Should not be located in areas subject to direct sunlight, direct impact, or temperature outside rated range. Incompatible with chlorinated hydrocarbons, ketones, esters, and certain alcohols. Not for use in air systems where compressors are lubricated with fire-resistant fluids such as phosphate ester or diester. Should not be used where strong acids or bases are present or in salt-laden atmospheres. 2- and 3-Pc. Combination Units
- 5-micron particulate filter Max. pressure: 250 psi Max. temp.: 175°F, except Part Numbers: 21U832 to 21U835 are 150°F Feature either a manual or automatic drain to remove collected water from filter bowl. Provide long life and accurate pressure regulation. Units have die-cast zinc bowl and included gauge. Easy to install in most pneumatic systems. Metal bowl kits available on ImperialSupplies.com®.
|Grainger Dropship||21U850||Filter Element Kit,|
|VMRS (ATA) CODES||053-006-009||Filter Element Kit,|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here