Conveyor Support Stand, H-Stand, Light- to Medium-Duty, 1500 lb. Stand Load Capacity
H-stands bolt to conveyor sections and the floor to provide permanent support for powered or unpowered (gravity-flow) conveyors. The height of the stands and the angle of the stands' mounting plates can be adjusted to create a sloped or level conveying surface. The stands must have a load capacity that is greater than the combined weight of the conveyor sections they are supporting and the items being moved on the conveyor.
Conveyor support stands hold up the sections of a conveyor, and the height of each conveyor stand can be adjusted to create a level or sloped conveying surface. The load capacity of the stands must be greater than the weight of the conveyor sections the stands are supporting and the items being moved on the conveyor. Increasing the number of stands under a conveyor section will increase the maximum load capacity of the conveyor section. A minimum of two stands is required for a conveyor with one section, and a minimum of three stands is required for every two conveyor sections in conveyors with more than one section. They are commonly used on conveying systems in warehouses, package handling areas, manufacturing and assembly facilities, and distribution centers.
|Grainger Dropship||5W817||Conveyor H Stand,LD,W|
|VMRS (ATA) CODES||053-006-009||Conveyor H Stand,LD,W|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here