Share
Print
DAYTON
Electric Operated Drum Pump, Unmetered Dispensing with Manual Shut-Off, 110VAC, 1-1/10 Motor HP
Hover over image to magnify
#914236-4 | Pkg Qty: 1
$1,155.84 pkg | $1,155.84 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Adapter Diameter
2 in.
Metered
No
Adapter Material
Polypropylene
Mfr. Part Number
1DLP8
Adapter Type
Bung
Mfr. Warranty Length
Agency Compliance
ETL Recognized Component(Motor Only)
Motor Enclosure
ODP
Brand
DAYTON
Motor RPM
0-10,000
Cord Length
16 ft.
Motor Type
Electric AC Brush
DEF Compatible
No
Nozzle Material
Polypropylene
Discharge Tube Length
6 ft.
Outlet Size
1" Barb
Discharge Tubing Material
PVC
Overall Length
50 in.
Duty Cycle
Intermittent
Pack Quantity
1
Fits
2" Bung
Phase
1
Food Grade
No
Plug Type
NEMA 5-15-P
For Use On
5, 15, 30 and 55 gal. Drums
Power Source
Electric
Full Load Amps
8-1/2
Pump Body Material
Polypropylene
GPM
32
RPM
10000
Gasket Material
Seal Material
Sealless
Height
39 in.
Self-Priming
Yes
Horsepower
1
Shipping Weight
19.51 lb.
Hose Length
72 in.
Suction Design
Constant
Housing Material
Polypropylene
Suction Pipe Size
1.6 in.
Hz
60
Suction Tube Length
39 in.
Inlet Size
1.6"
Suction Tube Type
Centrifugal
Item
Electric Operated Drum Pump
Thermal Protection
Yes
Maximum Air Inlet PSI
16
Type
Motor and Tube
Maximum GPM for Oil
7
Variable Speed
Yes
Maximum GPM for Water
15
Voltage
110 VAC
Maximum Head
36 ft.
Voltage @ 60 Hz
110
Maximum Liquid Temperature
130°F
Wetted Materials
Carbon Graphite, Hastelloy C-276, Polypropylene, PVC, Viton
Maximum Pressure
16 psi
pH Range
Maximum Viscosity
1500 CPS
General
Adapter Connection Type
MNPT
Includes Spout
No
Application
Chemical Transfer
Includes Suction Tube
Yes
Bung Connection Dia.
2 in
Max. Flow Rate
15 gpm
Compatible Chemicals
Acetic Acid 20%, Acetic Acid 80%, Ammonia (Liquids), Calcium Chloride, Chromic Acid 50%, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Nitric Acid (10% Solution), Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sulfuric Acid (10% - 75%)
Max. Fluid Temp.
130 Degrees F
Diesel Exhaust Fluid Compatible
No
Max. Head - Pumps
36 ft
Discharge Connection Type
Hose Barb
Max. Head Pressure
16 psi
Discharge Tube Outlet ID
1 in
Max. Oil Flow
7 gpm
Discharge Tube Outlet OD
1 1/2 in
Max. Outlet Pressure
16 psi
For Container Size
55 gal
Noise Level
84 db
For Container Type
Drum
Nominal Voltage
110V AC
For Media Type
Acetic Acid, Ammonia, Calcium Chloride, Chromic Acid, Citric Acid, Ethylene Glycol, Glycerin, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Sulfuric Acid, Water
Not Recommended Chemicals
Acetic Acid (Glacial), Acetone, Ammonium Hydroxide, Chromic Acid 30%, Cyclohexane, DEF, Ethyl (Ethanol), Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Formic Acid, Gasoline, Heptane, Hexane, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (75% - 100%), Toluene, Trichlorethylene (50%), Xylene
For Use With
9400
Nozzle Operation
Manual
Frequency (Hz)
50/60
Number of Phases
1
Hose Cover Material
PVC
Pump Package Type
Unmetered Dispensing with Manual Shut-Off
Hose Inside Dia.
1 in
Rated Voltage
110V AC
Hose Outside Dia.
1 1/4 in
Runs Dry
Yes
Hose Tube Material
PVC
Spout Connection Type
Hose Barb
Housing Material - Pumps
Polypropylene
Standards
UL Recognized Component (Motor Only)
Includes Bung Adapter
Yes
Suction Tube ID
1 1/3 in
Includes Discharge Hose
Yes
Suction Tube Material
Polypropylene
Includes Nozzle
Yes
Suction Tube OD
1 3/5 in
Product Description
Acid, base, and solvent electric drum pumps are made with corrosion-resistant materials that withstand a range of acidic and basic chemical concentrations. They are used to dispense and transfer moderate to large volumes of substances and solutions in laboratories and chemical processing plants.
Expertly Selected Product Pairings
Item Barcode
Pump,Drum,Voltage @ 60 Hz 110
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 1DLP8 | Pump,Drum, Voltage @ 60 |
 | UNSPSC CODES | 40151510 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump,Drum, Voltage @ 60 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here