Home All Products Fluid Transfer & Pumps Drum & Barrel Pumps Drum Pump Discharge Hoses SKU: 911698
Share  
Print  
FILL-RITE

EPDM 3/4 in. x 8 ft. Hose with Polypropylene Ball Valve Tap

Hover over image to magnify
Hose Ball Valve,Dia. 3/4 In
Hose Ball Valve,Dia. 3/4 In

#911698 | Pkg Qty: 1

$55.82 pkg | $55.82 ea
Pricing is subject to change without notice

Drop Ship Item

Shipping to 60045

Technical Specifications

Key Specifications
Brand
FILL-RITE
Material of Construction
EPDM, Polypropylene
Clamp Style
Band
Mfr. Part Number
KITHA32V
Diameter
3/4
Package Quantity
1
For Use with Pump Numbers
6XGV2
Shipping Weight
1.82 lb.
Hose Inside Diameter
3/4 in.
Used For
DEF, Chemical
Item
Hose Ball Valve
Wetted Materials
EPDM, Polypropylene
Length
96 in.
General
Compatible Chemicals
Antifreeze (Coolant), DEF, Ethylene Glycol, Glycerin, Motor Oil
Includes
3/4 in x 8 ft Hose with Ball Valve Tap
Diesel Exhaust Fluid Compatible
Yes
Max. Working Pressure @ 70 F
38 psi
For Media Type
Antifreeze, DEF, Ethylene Glycol, Glycerin, Motor Oil
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, Deionized Water, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Fertilizers, Formic Acid, Fresh Water, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Xylene
Hose Inside Dia.
3/4 in
Temp. Range
15 Degrees to 120 Degrees F
Hose Outside Dia.
1 in

Product Description

Drum pump discharge hoses are flexible tubes that connect to a drum pump outlet to convey fluids being pumped out of a container. They allow fluids to be directed away from the pump outlet for safe dispensing or transferring to another container with minimal product loss. Drum pump hose makes full contact with pumped fluids, so it should be made of compatible material to prevent fluid contamination or damage to the hose. These hoses are often used with a nozzle for controlled dispensing.

Item Barcode
9116980
Hose Ball Valve,Dia. 3/4 In
 NameItemDescription
Grainger DropshipGrainger Dropship6XGV3Hose Ball Valve,Dia.
UNSPSC CODESUNSPSC CODES40151529
VMRS (ATA) CODESVMRS (ATA) CODES053-999-057Hose Ball Valve,Dia.

For more product information by email, click here