Share
Print
GOULDS WATER TECHNOLOGY
120/240 VAC Cast Iron Centrifugal Pump, 1-Phase, 1-1/2" NPT Inlet Size
Hover over image to magnify
#911203-4 | Pkg Qty: 1
$871.81 pkg | $871.81 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
UL/CSA
Maximum Pressure
45 psi
Amps
14.8/7.4 A
Maximum Specific Gravity
1
Best Efficiency GPM @ Head
40 @ 60 ft.
Mfr. Part Number
GT07
Best Efficiency GPM @ PSI
40 to 60 ft.
Mfr. Warranty Length
1 yr.
Brand
GOULDS WATER TECHNOLOGY
Minimum GPM @ Head
10 gpm @ 92 ft.
Drain Plug
3/8 in.
Motor Enclosure
ODP
Duty
Continuous
NEMA/IEC Frame
56J
Frame
56J
Outlet
1-1/2 in.
GPM @ 10 PSI
46
Outlet Size
1-1/2 in. NPT
GPM @ 15 PSI
45
Pack Quantity
1
GPM @ 20 PSI
44
Phase
1
GPM @ 25 PSI
40
Port Rotation
TOP
GPM @ 30 PSI
34
Pressure Pump Type
Centrifugal Pump
GPM @ 35 PSI
26
RPM
3500
GPM @ 40 PSI
10
Screw Material
Steel
GPM of Water @ 2 Ft. of Head
140
Seal Application
Water
Height
9-1/4 in.
Seal Material
Carbon, Ceramic,Buna
Horsepower
3/4
Seal Type
Mechanical Shaft
Housing Material
Cast Iron
Service Factor
1.15
Hz
60
Shaft Material
Stainless Steel
Impeller Material
Noryl
Shipping Weight
47.2 lb.
Impeller Type
Closed
Shut-Off
104 ft.
Inlet
1-1/2 in.
Suction Lift
25 ft.
Inlet Pressure
25 psi
Thermal Protection
Automatic Reset
Item
Centrifugal Pump
Type
Self-Priming
Length
19-3/16 in.
Voltage
120/240 VAC
Maximum Case Pressure
125 psi
Volute Material
Cast Iron
Maximum Diameter Solids
1/16
Wetted Materials
CI, Noryl, Lexan, Carbon, Ceramic and Buna
Maximum Fluid Viscosity
40 SSU
Width
8-1/4 in.
Maximum Head
104 ft.
General
Application
For Lawn Sprinkling, Irrigation, Air Conditioning Systems, Heat Pump and Water Transfer
Intake Type
NPT
Best Efficiency Flow
40 gpm
Intake and Discharge Size
1 1/2 in , 1 1/2 in
Best Efficiency Head
60 ft of head
Manufacturer Warranty Length
1 yr
Case Pressure (Maximum)
125 psi
Maximum Feet of Head
104 ft
Compatible Discharge Pipe Size
1 1/2 in
Maximum Media Temperature
140 Degrees F
Compatible Intake Pipe Size
1 1/2 in
Motor Enclosure Type
ODP
Compatible with Media Type
Clear Water Only
Motor Frame Designation
56J
Discharge Type
NPT
Nameplate Voltage
120/240V AC
Features
Casing Design Prevents the Seal from Running Dry, Back Pull Out Design for Ease of Maintenance
Priming
Self-Priming
Feet of Head (Minimum)
5 ft
Pump Housing Material
Cast Iron
Flow Rate @ 10 psi
46 gpm
Pumping Application
Air Conditioning Systems, De-Watering, Heat Pumps, Irrigation, Lawn Sprinkling, Water Transfer
Flow Rate @ 15 psi
45 gpm
Shut Off Pressure (Maximum)
45 psi
Flow Rate @ 20 psi
44 gpm
Solid Diameter (Maximum)
0.06 in
Flow Rate @ 30 psi
34 gpm
Specific Gravity (Maximum)
1
Flow Rate @ 40 psi
10 gpm
Suction Lift (Maximum)
25 ft
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Thermal Overload Protection
Yes
For Use With Potable Systems
No
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic, Lexan, Noryl
Includes
Buna N and Carbon/Ceramic Parts
Product Description
This single-phase unit uses an air-water mixture to reach a fully-primed pumping condition. It features built-in overload protection with automatic reset.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Documents
Item Barcode
Centrifugal Pump 3/4 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 1N441 | CENTRIFUGAL PUMP 3/4HP |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | CENTRIFUGAL PUMP |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here