|Brand||EATON WEATHERHEAD||Pack Quantity||5|
|Connection Type||Female||Series||338 P|
|Fitting Style||Swivel||System of Measurement||Fractional|
|Hex Size||7/8 in.||Thread Style - Fittings||SAE|
|Hose Cutoff Factor||1 in.||Trade Name||COLL-O-CRIMP|
|Hose I.D.||1/2 in.||Tube Flare||45 deg.|
|Item||Crimp Hose End||Tube Size||1/2 in.|
|Material||Brass||Working Pressure (PSI)||Determined by hose burst pressure.|
- SAE 45° Female Swivel Hose End.
- Brass material offers excellent resistance against corrosion.
- Permanent hose end, saves time and it's easy to assemble.
- Hose Inside Diameter: 1/2
- Tube Size: 1/2
- Thread Size: 3/4-16
- Cross Reference: 33808P-408
- For use with Rubber Air Brake Hose.
- NOTE: Use special Collet For Rubber Air Brake Hose, Part No. 3118 for this hose end.
- Assembly Instructions:
- Push collar onto hose until bottomed.
- Push insert into hose until step on insert (or hex) is flush with collar.
NOTE: Swivel fittings require the use of a mandrel or an assembled adapter to push on the insert for assembly. Adapter can be removed after fitting assembly. Light lubricant may be required to assemble fitting into hose.
- Check for bottoming by checking collar movement along insert. Hose is bottomed when collar cannot slide along insert.
|WEATHERHEAD||33808P-408||CRIMP END 33808P-408|
|WEATHERHEAD||38808P-408||CRIMP END 33808P-408|
|UNSPSC CODES||27121700||CRIMP END 33808P-408|
|VMRS (ATA) CODES||053-008-004||CRIMP END 33808P-408|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here