Share
Print
APPROVED SUPPLIER
5/8 ID X 3/8" Pipe Barb Tite End No Yellow Cap Incl.
Hover over image to magnify
Technical Specifications
Angle
90 deg.
Mfr. Part Number
92097
Brand
APPROVED SUPPLIER
Package Quantity
5
Connection Type
Male
Pipe Thread
3/8"-18
Fitting Type
Rigid
Series
100 'B' Series Barb-Tite
Grade
CA360
Shape
Elbow
Hose Cutoff Factor
0.63 in.
Shipping Weight
1.1 lb.
Hose Inside Diameter
5/8 in. x 3/8 in.
System of Measurement
Fractional
Item
Field Attachable Hose End
Working Pressure
Determined by maximum working pressure for hose size
Material
Brass
Product Description
Low Pressure 90° Elbow Male Pipe Rigid Barb-Tite Hose End
- 100 'B' Series.
- Material: Ca360 Brass
- Hose Inside Diameter: 5/8
- Pipe Size: 3/8
- Thread Size: 3/8-18
- For Use With H100 , H101 , And H201 Hose. To Assemble. Lubricate Insert. Hold Hose At Angle And Push On And Up Over First Barb. Continue To Push Straight On Until Hose Is Seated Under Protective Plastic Cap. To Disassemble. Split Hose, But Do Not Cut Completely Through Hose Because The Sealing Edge Of Barb Could Be Damaged. Bend Hose And Remove With Quick Pull.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Barb 90'ML El 5/8X3/8
| Name | Item | Description | |
|---|---|---|---|
 | WEATHERHEAD | See Anderson # | BARB-TITE 5/8 IDx3/8P. |
 | UNSPSC CODES | 40141700 | |
 | VMRS (ATA) CODES | 053-008-004 | BARB-TITE 5/8 IDx3/8P. |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here