|Connection Type||Male||Pack Quantity||10|
|Fitting Style||Swivel||Series||100 'B' Series Barb-Tite|
|Fitting Type||Inverted||System of Measurement||Fractional|
|Hose Cutoff Factor||1.19 in.||Tube Size||5/16 in.|
|Hose I.D.||1/4 in.||Tube/Pipe Hex Size||1/2 in.|
|Item||Field Attachable Hose End||Working Pressure (PSI)||Determined by maximum working pressure for hose size|
- 100 'B' Series.
- Material: CA360 brass
- Hose Inside Diameter: 1/4
- Tube Size: 5/16
- Thread Size: 1/2–20
- Cut-Off Factor: 1-3/16
- Cross Reference: 10004B-B05
- For use with H100, H101, and H201 Hose.
Lubricate insert. Hold hose at angle and push on and up over first barb. Continue to push straight on until hose is seated under protective plastic cap.
Split hose, but do not cut completely through hose because the sealing edge of barb could be damaged. Bend hose and remove with quick pull.
|WEATHERHEAD||10004B-B05||BARB TITE 10004B-B05|
|UNSPSC CODES||40141700||BARB TITE 10004B-B05|
|VMRS (ATA) CODES||053-008-004||BARB TITE 10004B-B05|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here