Share
Print
APPROVED SUPPLIER
90° Male Swivel Push-To-Connect Fitting, 5/32" x 1/8"
Technical Specifications
Angle
90 deg.
Package Quantity
100
Brand
APPROVED SUPPLIER
Pipe Thread
1/8 in.
Brass Non DOT Push-to-Connect Fittings Type
Male Elbow Swivel
Shape
Elbow
Connection Type
Male
Shipping Weight
7.5 lb.
DOT Approved
No
System of Measurement
Fractional
Fitting Style
Swivel
Tube Outside Diameter
5/32 in.
Item
Push-To-Connect Fitting
Working Pressure
750 psi
Material
Brass
Product Description
Push To Connect Fitting
- Male 90° Elbow.
- Working Pressure: 750 Psi.
- Suitable For Vacuum Service.
- For Use With Polyethylene/Nylon And Polyurethane (90 Durometer And Over) And Soft Metal Tubing.
- Temperature Range: -10° F. To 200° F.
- Tube Outside Diameter: 5/32
- Pipe Size: 1/8
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Push Ml Elb 5/32X1/8 Non Dot-S
Name | Item | Description | |
---|---|---|---|
UNSPSC CODES | 27131600 | Air fittings and connectors | |
VMRS (ATA) CODES | 053-008-004 | MALE ELBOW 1/8 X 5/32- SWIVEL |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here