Share
Print
EATON
Plugs For Push To Connect Fittings 1/2 Tube Od
Hover over image to magnify
Technical Specifications
Brand
EATON
Mfr. Part Number
1829X8
Brass DOT Push-to-Connect Fittings Type
Pressure Plugs
Pack Quantity
5
DOT Approved
Yes
Shipping Weight
0.03 lb.
Fitting Type
Air Brake Fitting
System of Measurement
Fractional
Gasket Material
Ethylene Propylene
Trade Name
QUICK CONNECT
Grade
CA360
Tube Outside Diameter
1/2 in.
Material
Brass
Vibration Resistance
Moderate
Meets Standards
D.O.T. FMVSS 571.106 and SAE J1131
Working Pressure
Up to 150 psi
Product Description
Quick Connect® Air Brake Pressure Plug
- Use With Weatherhead Nt100 Air Brake Tubing, 199 .
- Material: Nylon
- Tube Outer Diameter: 1/2
- For Use With: SAE J844 Type A And B.
- Cross Reference: 1829 X 8
| Assembly | Disassembly |
 |  |
| Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Plug-Push To Connect Ftg-1/2
| Name | Item | Description | |
|---|---|---|---|
 | WEATHERHEAD | 1829X8 | PLUG FOR PUS H TO CONNECT |
 | UNSPSC CODES | 27131600 | Air fittings and connectors |
 | VMRS (ATA) CODES | 053-008-004 | PLUGS |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here