DOT Approved A/B - Rubber Hose - Adapter 1/2" ABS x 1/2" Pipe x 7/8"-20 Thread Size

Rubber Air Brake 338 Series Crimp Air Brake Adapter Hose End

• Can Be Used For Nearly Any Automotive And Air Brake System Line.
• Easy To Assemble With A Good Selection Of Low Cost Hose End Configurations.
• Brass Material Offers Excellent Resistance Against Corrosion.
• Exceeds Pressure Requirements Of All Automotive Air Brake Systems. Actual Pressure Determined By Maximum Working Pressure Of Hose Size.
• Pipe Size: 1/2
• Abs Thread: 1/2
• Abs Thread Size: 7/8-20
• Cross Reference: 1390 X 8 X 8
• For Use With Rubber Air Brake Hose.
• Assembly Instructions:
• Push Collar Onto Hose Until Bottomed.
• Push Insert Into Hose Until Step On Insert (Or Hex) Is Flush With Collar. Note: Swivel Fittings Require The Use Of A Mandrel Or An Assembled Adapter To Push On The Insert For Assembly. Adapter Can Be Removed After Fitting Assembly. Light Lubricant May Be Required To Assemble Fitting Into Hose.
• Check For Bottoming By Checking Collar Movement Along Insert. Hose Is Bottomed When Collar Cannot Slide Along Insert.