Share
Print
PFERD
Pferd 6" Crimped Wire Wheel Brush, Carbon Steel, 0.014" Wire Dia., 1-1/8" Trim Length
Hover over image to magnify
Technical Specifications
Key Specifications
Abrasive Shank Size
No Shank
Maximum RPM
6000 RPM
Arbor Hole
2 in.
Mfr. Part Number
81116
Brand
PFERD
Mounting Type
Arbor Hole
Brush Diameter
6 in.
Package Quantity
1
Face Width
1-1/8 in.
Shipping Weight
1.12 lb.
Fill Material
Carbon Steel
Trim Length
1-1/8 in.
Item
Wire Wheel Brush
Wire Wheel Brush Type
Crimped
General
Application
Cleaning Rust, Scale, Dirt, Paint, Deburring, Edge Blending, Roughening for Adhesion, Flash Removal of Rubber and Plastic
Product Description
Wire Wheel Brush (Medium Face)
- Can Be Used For Cleaning Rust, Scale, And Dirt, Light Deburring, Edge Blending, Roughening For Adhesion, Finishing For Appearance, And Finish Preparation Prior To Painting Or Plating.
- Diameter: 6"
- Standard Arbor Hole: 2"
- Face Width: 1-1/8
- Maximum Rpm: 6,000
- Requires Adapter Bushings, Part No. 82245 Or Part No. 82246 .
- For Use With Right Angle Grinders Or Bench Grinders.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Wire Wheel 6" Medium
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 27111907 | WIRE WHEEL 6" WIDE |
 | VMRS (ATA) CODES | 053-010-001 | WIRE WHEEL 6" WIDE |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here