1/2" High Speed Steel Reamer, 3-15/16" Flute Length, 5-15/16" Overall Length, Black/Bronze Oxide
#80500 | Pkg Qty: 1
Number of Flutes
Pilot Drill Hole Size
High Speed Steel
Mfr. Part Number
Construction Reamer 1/2"
- Five Times Faster Than Drills Or Other Reamers--Less Fatigue, Higher Productivity.
- New Safety Design--Reduces Binding And Dangerous Chips.
- Fits Directly Into Drill--No Need For Adapter--Use 1/2 Inch Drill Motor.
- Tool Guard Collar--Protects Tool And Operator After Hole Penetration.
- Made With 4140 Steel.
- Spray Cutting Oil, Part No. 6513 Continually During Use Of Reamer.
- Cutting Diameter: 1/2
- Pilot Drill Hole Size: 5/16
- Shank Size: 1/2"
- Overall Length: 5-15/16"
- Flute Length: 3-15/16"
- Applications: Truck Frames, Spring Hangers, 5Th Wheel Mounting, Accessory Mounting, Enlarging Existing And Misaligned Holes.
- Three-Flat Shank.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Cobalt metal powder, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|UNSPSC CODES||27112837||REAMER 1/2"|
|VMRS (ATA) CODES||053-006-009||REAMER 1/2"|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here