Thread Sealant with PTFE, 3/4" x 1,429"

Hover over image to magnify
PTFE Thread Tape 3/4" X 1429"
PTFE Thread Tape 3/4" X 1429"

#75363 | Pkg Qty: 3

Item Number 75363
Scanner Description PTFE Thread Tape 3/4" X 1429"
Inventory Status In Stock
Weight 0.46 lb
Brand APPROVED SUPPLIER

Technical Specifications

Application
Pipe Thread
Pack Quantity
3
Brand
APPROVED SUPPLIER
Performance Temperature Range
-450 to 500
Characteristics
Solid Polymeric Film
Series
Blue Monster
Color Family
Blue
Temperature Range (Deg. F)
-450 to 500 deg. F
Density
0.8g/cm3
Tensile Strength
115 N/mm2
Item
Thread Sealant with PTFE
Thickness
0.0035
Length
1429 in.
Width
3/4 in.
Material
PTFE

Product Description

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. Thats 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylen, PVC, CPVC, ABS, fiberglass and more. It can be used on pipes carrying the following:

  • Alcohols, Gasohol
  • Aliphatic solvents, Aromatic sol
  • Ammonia, liquid
  • Caustics, concentrated (see precautions)
  • Compressed air, Steam, Water
  • Cutting oils
  • Diesel fuel oil
  • Ethylene glycol, Glycerine
  • Fatty acids
  • Heating oils, Kerosene
  • Hydraulic fluids, Hydraulic oils
  • Hydrogen, gaseous and liquid, Inert gases, gaseous and liquid
  • Jet fuel
  • Ketones, Petroleum solvents
  • Liquid Petroleum Gas, Natural gas
  • Mineral oils, Vegetable oils
  • Nitrogen, gaseous and liquid
  • Soap, liquid Pressure rating: Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used. Do not use Mill-Rose Blue Monster Thread Sealing Tape on oxygen lines! Mill-Rose recommends Green Oxygen Tape for oxygen lines. For further safety details consult the Material Safety Data Sheet.

Compliance & Restrictions

Safety Data Sheet (SDS)  View | Download
Item Barcode
0753630
  Name Item Description
UNSPSC CODES UNSPSC CODES 31201500
VMRS (ATA) CODES VMRS (ATA) CODES 053-999-074 PTFE TAPE 3/4" X 1429"

For more product information by email, click here