Thread Sealant with PTFE, 1/2" x 1,429"
|Scanner Description||PTFE Thread Seal Tape 1/2"|
|Application||Pipe Thread||Package Quantity||3|
|Brand||APPROVED SUPPLIER||Performance Temp. Range||-450 to 500|
|Characteristics||Solid polymeric film||Roll Size||1429 in.|
|Color Family||Blue||Size||1/2 in.|
|Density||.8g||Temperature Range (Deg F)||-450 to 500 deg. F|
|Item||Thread Sealant with PTFE||Tensile Strength||15 N/mm2|
|Max. Tape Performance Temp||500 deg. F|
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. Thats 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape.
Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. It can be used on pipes carrying the following:
- Alcohols, Gasohol
- Aliphatic solvents, Aromatic solvents, Chlorinated solvents
- Ammonia, liquid
- Compressed air, Steam, Water
- Cutting oils
- Diesel fuel oil
- Ethylene glycol, Glycerine
- Fatty acids
- Heating oils, Kerosene
- Hydraulic fluids, Hydraulic oils
- Hydrogen, gaseous and liquid, Inert gases, gaseous and liquid
- Jet fuel
- Ketones, Petroleum solvents
- Liquid Petroleum Gas, Natural gas
- Mineral oils, Vegetable oils
- Nitrogen, gaseous and liquid
- Soap, liquid
Pressure rating: Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa
Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Do not use Mill-Rose Blue Monster Thread Sealing Tape on oxygen lines!
Mill-Rose recommends Green Oxygen Tape for oxygen lines. For further safety details consult the Material Safety Data Sheet.
Compliance & RestrictionsLot tracked item
|VMRS (ATA) CODES||053-999-074||PTFE TAPE 1/2" X 1429"|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here