4" Knot Wheel Brush - Standard
|Scanner Description||4" Knot Wheel Brush - Standard|
|Brand||PFERD||Standard Arbor Hole||5/8-11|
|Brush Diameter||4 in.||Trim Length||7/8 in.|
|Face Width||5/8 in.||Wire Diameter||0.02 in.|
|Item||Wire Wheel Brush||Wire Material||Carbon Steel|
|Max. RPM||20000 rpm||Wire Type||Carbon Steel|
- The standard twist knot brush is more aggressive than crimped wire wheel brushes.
- Leaves a good surface finish.
Compliance & RestrictionsWARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|VMRS (ATA) CODES||053-010-001||KNOT WHEEL 4" STANDARD|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here