Share
Print
GATES
Heat-Sensitive Thermoplastic POWERGRIP Shrink Clamp; Fits Hose OD Range, 3-1/2" to 3-5/8", Fits Nominal Hose ID, 3-1/8", SB90
Hover over image to magnify
Technical Specifications
Brand
GATES
Minimum Hose Outside Diameter
3-1/2 in.
Clamp Diameter Range
3.5 in. to 3-5/8 in.
Nominal Hose Inside Diameter
3-1/8 in.
Cross Reference
SB90
Pack Quantity
5
Item
Shrink Clamp
Shipping Weight
1.01 lb.
Material
Heat-Sensitive Thermoplastic with a memory to prevent over or under tightening.
System of Measurement
Fractional
Maximum Hose Outside Diameter
3-5/8 in.
Trade Name
POWERGRIP
Mfr. Part Number
32990
Product Description
Gates® Shrink Clamp
- Revolutionary Powergrip Sb Clamps "Shrink To Fit".
- Ideal For All Applications, With Unsurpassed Sealability On All Types Of Coolant Hoses - Even Silicone.
- Unlike Other Clamps, They Maintain A Dynamic Tension So You Never Need To Re-Tighten Them.
- Nominal Hose Inside Diameter: 3-1/8"
- Minimum Hose Outside Diameter: 3-1/2"
- Maximum Hose Outside Diameter: 3-5/8"
- Cross Reference: Sb90
- Gates No.: 32990
- Note: To Ensure Correct Clamp Selection, Measure Hose Outside Diameter With Hose Installed On Stem.
Item Barcode
3-1/2-3-5/8"O.D.Shrink Clmp
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 31162906 | GATES CLAMP 3-1/2-3-5/8 |
 | VMRS (ATA) CODES | 053-008-007 | GATES CLAMP 3-1/2-3-5/8 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here