Share
Print
Hover over image to magnify
Technical Specifications
Abrasive Wheel Type
Type 27
Item
Abrasive Cut-Off Wheel
Arbor Size
7/8 in.
Material
Aluminum Oxide
Brand
PFERD
Maximum RPM
13300 RPM
Cut-Off/Chop Wheel Basic Material
Aluminum Oxide
Pack Quantity
1
Cut-Off/Chop Wheel Thickness
1/25 in./0.040 in.
Shipping Weight
0.09 lb.
Diameter
4-1/2 in.
Product Description
Type 27 Thin Depressed Center Cut-Off Wheel
- For Steel.
- Meets Dsa Standard 375; Also Complies With Ansi B7.1.
- Disc Diameter: 4-1/2
- Wheel Thickness: 0.045
- Arbor Size: 7/8
- Maximum Rpm: 13,300
- For Use With Right Angle Grinders.
- Caution: Cut-Off Wheels Should Never Be Used To Cut Fiberglass.
Compliance & Restrictions

WARNING: This product can expose you to chemicals including Silica, crystalline, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Cut-Off Whl 4-1/2" Stl & S/S
Name | Item | Description | |
---|---|---|---|
![]() |
UNSPSC CODES | 31191506 | CUT-OFF WHL TYPE27 4-1/2 |
![]() |
VMRS (ATA) CODES | 053-010-001 | Sandpaper & Discs & Supplies |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here