|Brand||APPROVED SUPPLIER||Max. RPM||23800 rpm|
|Diameter||1-1/2 in.||Pack Quantity||2|
|Flap Wheel Style||Mounted||Shank||1/4 in.|
|Grit||120||Shank Type - Flap Brush and Wheels||Straight|
|Item||Flap Wheel||System of Measurement||Fractional|
|Material||Aluminum Oxide||Width||1 in.|
- Resilient cotton backing.
- Full resin bond.
- Heat-resistant epoxy.
- For blending, finishing and deburring on very tight areas.
- For use with die grinders, rotary tools, and hand drills.
- Use on non-ferrous and ferrous metals, rubber, plastic and wood.
- Cleans burrs and threads.
- Shank Size: 1/4"
- Size: 1-1/2" x 1" x 1/4"
- Maximum RPM: 23,800
- Grit: 120
|UNSPSC CODES||31191506||FLAP WHEEL 1 1/2" 120 GRIT|
|VMRS (ATA) CODES||053-010-001||FLAP WHEEL 1 1/2" 120 GRIT|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here