5/16"-18 Tap, Plug, 4 Flutes, Bright Finish, USS
#70241 | Pkg Qty: 1
Mfr. Part Number
Number of Flutes
Subgroup | Tap
Straight Flute Hand
System of Measurement
Pitch Diameter Limits
High Speed Steel
Tap Thread Size
Straight with Square
Plug Tap 5/16-18
- Plug Taps Have 3 To 5 Threads Chamfered For General Use When Tapping To Bottom Of Hole Is Not Critical.
- High-Speed Tungsten Steel Taps Out Perform Ordinary Taps For Production Tapping.
- Special Design Keeps Taps Sharper Longer.
- Sizes Are Clearly Stamped On The Shank Of Each Tap.
- Precision Ground Flutes Cut Accurate, Clean Threads.
- All Taps Are Right Hand Threaded.
- Uss Fractional Size: 5/16-18
- Flutes: 4
- Note: For Optimum Results And Longer Tool Life, Use Imperial Cutting Oil, Part No. 6513 .
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Plug Tap 5/16-18 Coarse USS
|UNSPSC CODES||23241615||PLUG TAP 5/16-18|
|VMRS (ATA) CODES||053-006-009||PLUG TAP 5/16-18|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here