Share
Print
1/4"-20 Tap, Straight Flute (Hand), 4 Flutes, High Speed Steel, Bright Finish, USS
Hover over image to magnify
Technical Specifications
Key Specifications
Application
For Tapping Under Power Through Shallow or Blind Holes
Square Length
5/16 in.
Brand
APPROVED SUPPLIER
Square Size
0.191 in.
Item
Tap
Standards
ANSI, Unified and American National Threads
List Number
5303
Subgroup | Tap
Straight Flute Hand
Mfr. Part Number
702400
System of Measurement
Fractional
Number of Flutes
4
Tap Chamfer
Plug
Number of Pieces
1
Tap Dimension Type
Inch
Overall Length
2-1/2 in.
Tap Finish
Bright
Pack Quantity
1
Tap Material
High Speed Steel
Pitch Diameter Limits
H3
Tap Thread Size
1/4 in.-20
Point
Spiral
Tap Thread Type
UNC
Shank Diameter
0.255 in.
Thread Direction
Right Hand
Shank Type
Straight with Square
Thread Length
1 in.
Shipping Weight
0.03 lb.
General
Application
For Tapping Under Power Through Shallow or Blind Holes
Product Description
Plug Tap 1/4-20
- Plug Taps Have 3 To 5 Threads Chamfered For General Use When Tapping To Bottom Of Hole Is Not Critical.
- High-Speed Tungsten Steel, Taps Out Perform Ordinary Taps For Production Tapping.
- Special Design Keeps Taps Sharper Longer.
- Sizes Are Clearly Stamped On The Shank Of Each Tap.
- Precision Ground Flutes Cut Accurate, Clean Threads.
- All Taps Are Right Hand Threaded.
- Uss Fractional Size: 1/4-20
- Flutes: 3
- Note: For Optimum Results And Longer Tool Life, Use Imperial Cutting Oil, Part No. 6513 .
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Plug Tap 1/4-20 Coarse USS
| Name | Item | Description | |
|---|---|---|---|
|
UNSPSC CODES | 23241615 | PLUG TAP 1/4-20 |
|
VMRS (ATA) CODES | 053-006-009 | PLUG TAP 1/4-20 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here