Share
Print
Hover over image to magnify
Technical Specifications
Brand
APPROVED SUPPLIER
Square Length
3/16 in.
Item
Tap
Square Size
0.11 in.
Mfr. Part Number
702040
Standards
USCTI Table 302A
Number of Flutes
3
Subgroup | Tap
Straight Flute Hand
Overall Length
2 in.
System of Measurement
Fractional
Pack Quantity
1
Tap Chamfer
Taper
Pitch Diameter Limits
H2
Tap Finish
Bright
Point
Spiral
Tap Material
High Speed Steel
Shank Diameter
0.141 in.
Tap Thread Size
#6-32
Shank Type
Straight with Square
Thread Length
11/16 in.
Shipping Weight
0.02 lb.
Product Description
Taper Tap
- Taper Taps Have 8 To 10 Threads Chamfered For Easy Thread Starting In Tough Materials.
- High-Speed Tungsten Steel Taps Out Perform Ordinary Taps For Production Tapping.
- Special Design Keeps Taps Sharper Longer.
- Sizes Are Clearly Stamped On The Shank Of Each Tap.
- Precision Ground Flutes Cut Accurate, Clean Threads.
- All Taps Are Right Hand Threaded.
- USS Fractional Size: 6-32
- Flutes: 3
- Note: For Optimum Results And Longer Tool Life, Use Imperial Cutting Oil, Part No. 6513 .
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Taper Tap 6-32 Coarse USS
| Name | Item | Description | |
|---|---|---|---|
|
UNSPSC CODES | 23241615 | TAP, TAPER 6-32 |
|
VMRS (ATA) CODES | 053-006-009 | TAP, TAPER 6-32 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here