Share  
Print  
POWER-STUD

6-1/4" Steel Expansion Wedge Anchor, 3/4" Anchor Dia., Zinc, 10PK

Hover over image to magnify
Power Stud 3/4 X 6-1/4
Power Stud 3/4 X 6-1/4

#10548 | Pkg Qty: 5

In Stock

Shipping to 60045
Catalog: B36

Technical Specifications

Anchor Diameter
3/4 in.
Minimum Embedment
3-3/8 in.
Anchor Length
6-1/4 in.
Pack Quantity
5
Basic Material
Carbon Steel
Shipping Weight
4.47 lb.
Brand
POWER-STUD
Thread Length
4-1/4 in.
Item
Wedge Anchor
Thread Size
3/4"-10
Material
Carbon Steel
Type
Fully Threaded
Mfr. Part Number
7444SD1

Product Description

Power-Stud® Wedge Anchor
  • A One-Piece, Wedge Style Anchor Designed For Use In Concrete.
  • The Anchor Diameter Is The Same As The Diameter Of The Hole For Faster Installation.
  • Chamfered Threaded End Prevents Damage To The Threads During Installation.
  • Carbon Steel Power Stud Anchors Are Bright Zinc Plated.
  • Size: 3/4 X 6-1/4
  • Minumum Embedment: 3-3/8"
  • Thread Length: 4-1/4
  • Note: The Length Shown Is The Overall Length Of The Anchor. Allow One Anchor Diameter For The Nut And Washer Thickness When Selecting A Length. Installation Procedures Using The Proper Diameter Bit, Drill A Hole Into The Base Material To A Depth Of At Least 1/2" Or One Anchor Diameter Deeper Than The Embedment Required. The Tolerances Of The Drill Bit Used Should Meet The Requirements Of Ansi Standard B212.15. Blow The Hole Clean Of Dust And Position The Power Stud. Drive The Anchor Through The Fixture Into The Anchor Hole Until The Nut And Washer Are Firmly Seated Against The Fixture. Be Sure The Anchor Is Driven To The Required Embedment Depth. Tighten The Anchor By Turning The Nut 3 To 4 Turns Or By Applying The Guide Installation Torque From The Finger Tight Position.
Item Barcode
0105480
Power Stud 3/4 X 6-1/4
 NameItemDescription
UNSPSC CODESUNSPSC CODES31162101POWER STUD 3/4 X 6-1/4
VMRS (ATA) CODESVMRS (ATA) CODES053-007-015Stud -Multi Position

For more product information by email, click here